Search
Filters
Close

PCI-9113A

32-CH, 12-Bit, 100 kS/s Isolated Analog Input Card  
Caratteristiche
  • Supports a 32-bit 5 V PCI bus
  • 12-bit A/D resolution
  • Up to 100 kS/s sampling rate
  • 32-CH single-ended or 16-CH differential inputs
  • On-board 1 k-sample A/D FIFO
  • Bipolar or unipolar analog input ranges
  • Programmable gains of x1, x10, x100
  • Automatic analog inputs scanning
Manufacturer: Adlink Technology Inc.

ANALOG INPUT

Number of channel: 32 single-ended or 16 differential
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 100 kS/s
Input signal ranges:
Gain Input range
Bipolar Unipolar
1 ±10 V ±5 V 0 to 10 V
10 ±1 V ±0.5 V 0 to 5 V
100 ±0.1 V ±0.05 V 0 to 0.1 V

Accuracy: 0.01% of FSR ± 1 LSB
Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software, pacer
FIFO buffer size: 1k samples
Data transfer: polling, interrupt
Isolation Voltage: 2500 VRMS

GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 960 mA typical
Dimensions (not including connectors): 173 x 107 mm

ANALOG INPUT

Number of channel: 32 single-ended or 16 differential
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 100 kS/s
Input signal ranges:
Gain Input range
Bipolar Unipolar
1 ±10 V ±5 V 0 to 10 V
10 ±1 V ±0.5 V 0 to 5 V
100 ±0.1 V ±0.05 V 0 to 0.1 V

Accuracy: 0.01% of FSR ± 1 LSB
Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software, pacer
FIFO buffer size: 1k samples
Data transfer: polling, interrupt
Isolation Voltage: 2500 VRMS

GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 960 mA typical
Dimensions (not including connectors): 173 x 107 mm