Cerca
Filters
Close

JetNet-7310G V2

Switch PoE 10 porte Layer 3 con 8 porte Gigabit PoE+ e 2 porte Gigabit RJ45/SFP (managed)
Caratteristiche
  1. 8 Gigabit Ethernet RJ-45 ports ,2 Gigabit Ethernet SFP ports
  2. 8 IEEE802.3at PSE with 240W PoE Power forwarding capability
  3. Non-Blocking, High Speed Network Switching Fabric
  4. Network Redundancy – MSR (Multiple Super Ring),ITU-T G.8032 ERPS, RSTP, MSTP, Super Chain
  5. Fully Device Management – SNMP v1/v2c/v3, RMON, Web UI, Telnet and Local Console
  6. Friendly Device and Network Topology recovery utility – Korenix View, Korenix NMS
  7. Advanced Cyber Network Security –MAC security, IEEE 802.1x Port Based access control , IEEE 802.1x Radius Server authentication, 802.1x MAB, Distributed Denial of Service, IP Source Guard, Denial of ARP Inspection
  8. Layer 2 Network Performance – IEEE802.1Q VLAN, Private VLAN, Trunk, Packet Filtering, DHCP Server/Client, Traffic Prioritize, Rate Control
  9. Layer 3 Network Routing Protocols – Static/Dynamic Route, VLAN Routing, Multicast Routing
  10. Advanced Layer 2 plus packet filtering (ACL) for field site network security 
  11. Hardware Watchdog for System Auto-Recovery
  12. High Level Electromagnetic interference immunity
  13. IP Surveillance solution with NEMA-TS2 characteristic
  14. Railway Track Side EN50121-4 compliance
  15. High Operating Temperature - -40~75°C
  16. Redundant wide range power input- DC 46~57V 
Produttore:: Korenix Technology
Technology
 
Standard
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 802.3af/at Power over Ethernet
Performance
 
Switch Technology
Store and Forward Technology with Non-Blocking Switch Fabric
CPU performance
32 bits CPU with Hardware based Watch-dog timer with 10S reset timer
System Memory
32MBytes flash ROM, 256M bytes system RAM
Transfer packet size
64 bytes to 9K bytes Jumbo Frame
MAC Address Table
16K
Packet Buffer
1.5MBytes shared memory for packet buffer with intelligent memory management unit for burst data traffic
Transfer performance
14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet
Management
 
Management Interface
Telnet with SSH, Web Browser with SSL, SNMP V1/V2c/V3 with SNMP Trap (up to 4 trap stations), RMON (Group 1,2,3,9) for in-band management. Local RS-232 M12 connector for out-band management.
Management Security
The maximum management session up to four, and support management Host IP secure feature to prevent unauthorized remote login
SNMP MIB
MIB-II, Bridge MIB, Ethernet-like-MIB, VLAN MIB, IGMP MIB, Private MIB
NMS
Windows based NMS (Network Management System) –Korenix NMS and Korenix View for device discovery and topology map auto construct
Network Time Protocol
NTP with daylight saving and localize time sync function
Management IP Security
Predefined Host IP address for management host login security
E-mail Warning
4 Receipt E-mail accounts with E-mail server authentication
System Event Log
2 Event log record modes- Local and remote Log Server with authentication
Network Performance
 
Port Configuration
Port link Speed, Link mode, current status and enable/disable
Port Trunk
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Static port trunk; trunk member up to 8 ports in one group, maximum 5 trunk groups
VLAN
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries; 3 VLAN link modes- Trunk mode, Hybrid mode and Link access mode
Private VLAN
The Private VLAN is special for group uplink access with independent port security. With the private VLAN function, each VLAN community is isolated and only exchange by high level device with primary VLAN community
IEEE 802.1Q QinQ
Supports Double VLAN tag for VLAN isolation and security
IEEE 802.1p
The Ethernet Switch MAC controller supports IEEE 802.1p Class of Service function; Per interface with 4 queues
IGMP Snooping
IGMP Snooping v1/v2/v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port
Rate Control
Ingress/Egress filtering for broadcast, multicast, unknown DA or all packets
Port Mirroring
On-line traffic monitoring on multiple selected ports
DHCP
System supports DHCP Client function for dynamic IP address obtain from DHCP Server, and the Switch also support DHCP Server function with DHCP Relay Agent to forward DHCP request through specified forwarding path. The DHCP Server also offer port based DHCP Server function with predefined IP address or perform MAC&IP address binding function
IEEE 802.1x/ Port Security
Port based network access control, and authenticated by localize pre-defined MAC address or remote RADIUS Server
Power over Ethernet
IEEE 802.3af, IEEE 802.3at, End-Span wiring architecture
PoE operating mode
Auto Mode: IEEE 802.3af/at behaviors with IEEE802.3af 1-Event and IEEE 802.3at 2-Event classification for standard PD
Forced Mode: User configured Power consumption budget control with IEEE 802.3 PoE
/PD detection, or forced without PD detection
PoE forwarding conductor
RJ-45: V+(3,6), V- (1,2)
Power forwarding capability
PoE Port: 15W/IEEE8-2.3af, 30W/IEEE 82.3at, 35W /IEEE802.3at with high power voltage input
PoE System Power Budget: 240W at 75°C Ambient temperature
PoE System Power Budget
Power Budget Reserve by PD declaration. The power budget control system will reserve power for connected PD device, once latest PD device (PoE 8) claimed power over the system surplus power, then the latest PoE will be disabled
System Power Budget: 240Watts / 54V for High Power PoE Input Voltage
Network Redundancy
 
Multiple Super Ring (MSRTM )
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM , Super ChainTM and backward compatible with Legacy Super RingTM
Rapid Dual Homing (RDHTM )
Multiple uplink paths to one or multiple upper Switch, up to 256 Groups RDHTM Peer protection
TrunkRingTM
Integrate port aggregate function in ring path to get higher throughput ring architecture
MultiRingTM
Supports redundant ring up to 5 Gigabit rings in one device
Super Chain
It is new ring technology with flexible and scalability, compatibility, and easy configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch
Rapid Spanning Tree
IEEE 802.1D-2004 Rapid Spanning Tree Protocol; it compatible with Legacy Spanning Tree and IEEE 802.1w
Multiple Spanning Tree
IEEE 802.1s Multiple Spanning Tree, each MSTP instance can include one or more VLANs, and also supports multiple RSTP deployed in a VLAN or multiple VLANs
ITU-T G.8032 ERPS Note-1
Support ITU-T G.8032 ERPS V1 single ring topology, and ERPS v2 multiple rings with
ladder topology
Cyber Security *Note-2
The Cyber Security function includes- DHCP Snooping protection, Dynamic ARP inspect protection, IP Source Guard (IPSG), Distribute Denial-of-Service (DDoS), IEEE 802.1x MAB for non-IEEE 802.1x compliant device.
Industrial Protocol
Modbus/TCP, Ethernet/IP
Routing Protocols
 
IP Routing
Supports Default Static and Dynamic Route
Virtual LAN Routing
Incorporate both of IEEE802.1Q Bridge and Routing Function
Routing Information Protocol
Hop-Based IP Routing with RIPv1 and RIPv2
IGMP
Multicast Group Management Protocol support IGMP v1,v2
Multicast Routing
128 IP Multicast Routing entries
VRRP
Short of Virtual Route Redundancy Protocol, Automatically Backup Routing route to specified router
OSPF
Link State based IP routing protocol support OSPFv1 and OSPFv2
Interface
 
Enclosure port
1000Mbps Gigabit Ethernet port (#1~#8): 8 x RJ-45 Connectors with IEEE 802.3at PSE function
SFP port (#9,#10): supports 1000Mbps Fiber Transceiver with Digital Diagnostic Monitoring (DDM) for optical fiber quality inspection. The SFP connection with high priority than RJ- 45 copper.
Power input: 4-Pin Removable Terminal Block Connector Digital Input: Semi Digital Input (Low: 0~10V, High:11~30V)
Digital Output: Dry Relay Output with Normal Open operating mode with DC 24V/0.5A contact capability
Reset Button
System hardware reset
Cables
100Base-TX: 2 pairs STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) 1000Base-T: 4 pairs STP Cat. 5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) Power Cable: Recommended uses 18AWG electrical power cable with UL certification for the high power PoE application
Diagnostic LEDs
1000Mbps RJ-45 port: Link (Green on)/Acrivity (Green Blinking),Speed 1000 (Amber on) PoE: PoE forwarding (Amber on), PoE abnormal or detection (Blinking)
1000Mps SFP: Link/Activity (Green on, Green Blinking), Speed 1000 (Amber on) Power: Power on (Green on)
Alm:Alarm(Red on) Sys: Ready (Green on)
R.S: Green on (Ring Normal)/Blinking (wrong ring port connective), Amber on (Ring abnormal)/Blinking (ring port failed)
D.I.: Digital Input (Green on) D.O.:Dry Relay Output (Red on)
Power Requirements
 
System Power Input
IEEE 802.3at 30W PoE application: DC 53~57V IEEE 802.3af 15.4W PoE application: DC 46~57V
Power Consumption
DC 48V: 14.5W (without PoE loading) DC 53V: 15 W (without PoE loading) DC 57V: 15.4W (without PoE loading)
Mechanical
 
Installation
EN50022 DIN Rail Mount
Dimensions
230.6mm (W) x 120mm (H) x 121.7mm (D)–with mounting ears 198mm (W) x 120mm (H) x 121.7mm (D)-without mounting ears
Material Housing
Steel Metal with Aluminum Housing
Ingress Protection
IP-31
Environmental
 
Operating temperature
-40~75°C: 240Watts with PoE full loading
Operating humidity
0%~95%, non-condensing
Storage Temperature
40~85°C
Hi-Pot
Power- Chassis GND/Housing: AC 1.2KV/ DC 2.25KV RJ-45 – Chassis GND/Housing: AC 1.2KV/ DC 2.25KV
Regulatory Approvals
 
Railway Application
Compliance with Rolling Stock Track Side EMC
EMC
EMI: IEC/EN61000-6-2, Compliance with EN50121-1/-4 , CE class A, FCC sub part-15 class-A
EMS: IEC/EN61000-6-4, Compliance with EN50121-1/-4, EN61000-4-2/-4-3/-4-4/-4-5/-4- 6/-4-8/-4-9
Vibration & Shock
Compliance with IEC 61373

 

Technology
 
Standard
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 802.3af/at Power over Ethernet
Performance
 
Switch Technology
Store and Forward Technology with Non-Blocking Switch Fabric
CPU performance
32 bits CPU with Hardware based Watch-dog timer with 10S reset timer
System Memory
32MBytes flash ROM, 256M bytes system RAM
Transfer packet size
64 bytes to 9K bytes Jumbo Frame
MAC Address Table
16K
Packet Buffer
1.5MBytes shared memory for packet buffer with intelligent memory management unit for burst data traffic
Transfer performance
14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet
Management
 
Management Interface
Telnet with SSH, Web Browser with SSL, SNMP V1/V2c/V3 with SNMP Trap (up to 4 trap stations), RMON (Group 1,2,3,9) for in-band management. Local RS-232 M12 connector for out-band management.
Management Security
The maximum management session up to four, and support management Host IP secure feature to prevent unauthorized remote login
SNMP MIB
MIB-II, Bridge MIB, Ethernet-like-MIB, VLAN MIB, IGMP MIB, Private MIB
NMS
Windows based NMS (Network Management System) –Korenix NMS and Korenix View for device discovery and topology map auto construct
Network Time Protocol
NTP with daylight saving and localize time sync function
Management IP Security
Predefined Host IP address for management host login security
E-mail Warning
4 Receipt E-mail accounts with E-mail server authentication
System Event Log
2 Event log record modes- Local and remote Log Server with authentication
Network Performance
 
Port Configuration
Port link Speed, Link mode, current status and enable/disable
Port Trunk
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Static port trunk; trunk member up to 8 ports in one group, maximum 5 trunk groups
VLAN
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries; 3 VLAN link modes- Trunk mode, Hybrid mode and Link access mode
Private VLAN
The Private VLAN is special for group uplink access with independent port security. With the private VLAN function, each VLAN community is isolated and only exchange by high level device with primary VLAN community
IEEE 802.1Q QinQ
Supports Double VLAN tag for VLAN isolation and security
IEEE 802.1p
The Ethernet Switch MAC controller supports IEEE 802.1p Class of Service function; Per interface with 4 queues
IGMP Snooping
IGMP Snooping v1/v2/v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port
Rate Control
Ingress/Egress filtering for broadcast, multicast, unknown DA or all packets
Port Mirroring
On-line traffic monitoring on multiple selected ports
DHCP
System supports DHCP Client function for dynamic IP address obtain from DHCP Server, and the Switch also support DHCP Server function with DHCP Relay Agent to forward DHCP request through specified forwarding path. The DHCP Server also offer port based DHCP Server function with predefined IP address or perform MAC&IP address binding function
IEEE 802.1x/ Port Security
Port based network access control, and authenticated by localize pre-defined MAC address or remote RADIUS Server
Power over Ethernet
IEEE 802.3af, IEEE 802.3at, End-Span wiring architecture
PoE operating mode
Auto Mode: IEEE 802.3af/at behaviors with IEEE802.3af 1-Event and IEEE 802.3at 2-Event classification for standard PD
Forced Mode: User configured Power consumption budget control with IEEE 802.3 PoE
/PD detection, or forced without PD detection
PoE forwarding conductor
RJ-45: V+(3,6), V- (1,2)
Power forwarding capability
PoE Port: 15W/IEEE8-2.3af, 30W/IEEE 82.3at, 35W /IEEE802.3at with high power voltage input
PoE System Power Budget: 240W at 75°C Ambient temperature
PoE System Power Budget
Power Budget Reserve by PD declaration. The power budget control system will reserve power for connected PD device, once latest PD device (PoE 8) claimed power over the system surplus power, then the latest PoE will be disabled
System Power Budget: 240Watts / 54V for High Power PoE Input Voltage
Network Redundancy
 
Multiple Super Ring (MSRTM )
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM , Super ChainTM and backward compatible with Legacy Super RingTM
Rapid Dual Homing (RDHTM )
Multiple uplink paths to one or multiple upper Switch, up to 256 Groups RDHTM Peer protection
TrunkRingTM
Integrate port aggregate function in ring path to get higher throughput ring architecture
MultiRingTM
Supports redundant ring up to 5 Gigabit rings in one device
Super Chain
It is new ring technology with flexible and scalability, compatibility, and easy configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch
Rapid Spanning Tree
IEEE 802.1D-2004 Rapid Spanning Tree Protocol; it compatible with Legacy Spanning Tree and IEEE 802.1w
Multiple Spanning Tree
IEEE 802.1s Multiple Spanning Tree, each MSTP instance can include one or more VLANs, and also supports multiple RSTP deployed in a VLAN or multiple VLANs
ITU-T G.8032 ERPS Note-1
Support ITU-T G.8032 ERPS V1 single ring topology, and ERPS v2 multiple rings with
ladder topology
Cyber Security *Note-2
The Cyber Security function includes- DHCP Snooping protection, Dynamic ARP inspect protection, IP Source Guard (IPSG), Distribute Denial-of-Service (DDoS), IEEE 802.1x MAB for non-IEEE 802.1x compliant device.
Industrial Protocol
Modbus/TCP, Ethernet/IP
Routing Protocols
 
IP Routing
Supports Default Static and Dynamic Route
Virtual LAN Routing
Incorporate both of IEEE802.1Q Bridge and Routing Function
Routing Information Protocol
Hop-Based IP Routing with RIPv1 and RIPv2
IGMP
Multicast Group Management Protocol support IGMP v1,v2
Multicast Routing
128 IP Multicast Routing entries
VRRP
Short of Virtual Route Redundancy Protocol, Automatically Backup Routing route to specified router
OSPF
Link State based IP routing protocol support OSPFv1 and OSPFv2
Interface
 
Enclosure port
1000Mbps Gigabit Ethernet port (#1~#8): 8 x RJ-45 Connectors with IEEE 802.3at PSE function
SFP port (#9,#10): supports 1000Mbps Fiber Transceiver with Digital Diagnostic Monitoring (DDM) for optical fiber quality inspection. The SFP connection with high priority than RJ- 45 copper.
Power input: 4-Pin Removable Terminal Block Connector Digital Input: Semi Digital Input (Low: 0~10V, High:11~30V)
Digital Output: Dry Relay Output with Normal Open operating mode with DC 24V/0.5A contact capability
Reset Button
System hardware reset
Cables
100Base-TX: 2 pairs STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) 1000Base-T: 4 pairs STP Cat. 5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) Power Cable: Recommended uses 18AWG electrical power cable with UL certification for the high power PoE application
Diagnostic LEDs
1000Mbps RJ-45 port: Link (Green on)/Acrivity (Green Blinking),Speed 1000 (Amber on) PoE: PoE forwarding (Amber on), PoE abnormal or detection (Blinking)
1000Mps SFP: Link/Activity (Green on, Green Blinking), Speed 1000 (Amber on) Power: Power on (Green on)
Alm:Alarm(Red on) Sys: Ready (Green on)
R.S: Green on (Ring Normal)/Blinking (wrong ring port connective), Amber on (Ring abnormal)/Blinking (ring port failed)
D.I.: Digital Input (Green on) D.O.:Dry Relay Output (Red on)
Power Requirements
 
System Power Input
IEEE 802.3at 30W PoE application: DC 53~57V IEEE 802.3af 15.4W PoE application: DC 46~57V
Power Consumption
DC 48V: 14.5W (without PoE loading) DC 53V: 15 W (without PoE loading) DC 57V: 15.4W (without PoE loading)
Mechanical
 
Installation
EN50022 DIN Rail Mount
Dimensions
230.6mm (W) x 120mm (H) x 121.7mm (D)–with mounting ears 198mm (W) x 120mm (H) x 121.7mm (D)-without mounting ears
Material Housing
Steel Metal with Aluminum Housing
Ingress Protection
IP-31
Environmental
 
Operating temperature
-40~75°C: 240Watts with PoE full loading
Operating humidity
0%~95%, non-condensing
Storage Temperature
40~85°C
Hi-Pot
Power- Chassis GND/Housing: AC 1.2KV/ DC 2.25KV RJ-45 – Chassis GND/Housing: AC 1.2KV/ DC 2.25KV
Regulatory Approvals
 
Railway Application
Compliance with Rolling Stock Track Side EMC
EMC
EMI: IEC/EN61000-6-2, Compliance with EN50121-1/-4 , CE class A, FCC sub part-15 class-A
EMS: IEC/EN61000-6-4, Compliance with EN50121-1/-4, EN61000-4-2/-4-3/-4-4/-4-5/-4- 6/-4-8/-4-9
Vibration & Shock
Compliance with IEC 61373