Cerca
Filters
Close

JetNet-5310G

Switch PoE 10 porte con 8 porte PoE+ e 2 porte Gigabit RJ45/SFP (managed)
Caratteristiche
  1. 8x 10/100 Base TX PoE ports and 2 Gigabit RJ/SFP combo ports
  2. IEEE 802.3af 15.4W / IEEE 802.3at 30W High Power PoE
  3. 80W total power budget for High-power PoE camera
  4. SFP ports 100/1000 Mbps with DDM
  5. RSR with 5ms recovery time
  6. MSR for up to 4 x 100M Rings and 2 Gigabit Uplink Rings
  7. LACP/VLAN/ Private VLAN / QinQ / GVRP/ QoS/ IGMP Snooping
  8. Rate Control/ Online Multi-Port Mirroring/DHCP
  9. Port Security, Access IP list, SSH and HTTPS Login
  10. Event Notification through E-mail, SNMP trap and SysLog
  11. IEEE 802.1AB LLDP
  12. Optional Korenix NMS software for auto-topology
  13. Cisco-Like CLI, Web, SNMP/RMON for network management
  14. Multiple event relay output for enhanced device alarm control
  15. Hi-Pot Isolation Protection for ports and power
  16. -40°~75°C wide operating temperature
Produttore:: Korenix Technology

Technology
Standard
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3u 100 Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000 Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High power Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol

System Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput
8.3Mega packet per second
CPU performance
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
System Memory
8M bytes flash ROM, 64M bytes SDRAM.
Transfer packet size
64 bytes to 1522 bytes (includes double VLAN tag).
MAC Address
8K MAC address table.
Packet Buffer
1M bits shared memory for packet buffer.
Transfer performance
14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
Environment Monitoring
Embedded board-level thermal detector for system temperature monitoring.

System Management
Configuration and monitoring interface
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface. 
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
Telnet & Local Console
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
SNMP
v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
SNMP MIB
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.
Korenix Utility
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
Network Time Protocol(NTP)
Supports NTP protocol with daylight saving function and localize time sync function.
Management IP Security
IP address security to prevent unauthorized access
E-mail Warning
4 receipt E-mail accounts with mail server authentication
System Log
Supports both Local or remote Server with authentication

Network Performance
Port Configuration
Port link Speed, Link mode, current status and enable/disable.
Port Trunk
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
VLAN
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes- Trunk, Hybrid and Link access.
Private VLAN
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN.
IEEE802.1 QinQ
Supports Double VLAN Tag function for implementing Metro Network topologies.
Class of Service
IEEE 802.1p class of service; per port 4 priority queues.
Traffic Prioritize
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
IGMP Snooping
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port.
Rate Control
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Port security to assign authorized MAC to specific port
DHCP
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82).
IEEE 802.1x
Port based network access control and user authentication by radius account, password and key for the radius server authentication.

Power Over Ethernet
PoE Standards
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
PoE Operating Mode
Auto mode:Auto detects and powering by IEEE 802.3af / IEEE 802.3at 2-Event behaviors 
Forced mode: User configured power consumption without detection, classification
PoE forwarding conductor
V+: RJ-45 conductor 3,6 
V-: RJ-45 conductor 1,2
PoE Forwarding ability
IEEE 802.3af: 15.4W/per port
IEEE 802.3at: 30W/per port
PoE System Power Budget
80W @ 75oC, 95% Humidity, DC 48V power input
Power Budget Control
Port-based system power budget control with first plug-in high priority mechanism

Network Redundancy
Multiple Super Ring (MSRTM)
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM.
Rapid Dual Homing (RDHTM)
Multiple uplink paths to one or multiple upper switch
TrunkRingTM
Integrates port aggregation function in ring path to get higher throughput ring architecture
MultiRingTM
Couple or multiple rings: JetNet 5310G supports up to 4 100M rings and 2 Gigabit ring in single switch.
Multiple Spanning Tree
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w multiple spanning tree.

Interface
Number of Ports
10/100Mbps PSE port: 8 x RJ-45
Gigabit Ethernet port : 2 x RJ-45 with auto MDI/MDI-X function
100Mbps / 1000Mbps Fiber port:2 x SFP Socket for SFP fiber transceiver with Hot-swappable function.
Console port: 1 x RJ-45 for system configuration 
Digital Input / Relay Output port: 4-Pin removable terminal block connector.
Power input port: 4-Pin removable terminal block connector
Cables
100 Base-TX: 2-pairs UTP/STP/FTP Cat.5 cable, EIA/TIA-568B 100-ohm (100m) 
1000 Base-T: 4-pair UTP/STP/FTP Cat.5e cable, EIA/TIA-568B 100-ohm (100m) 
Uses STP or FTP cable can provide higher electromagnetic resistance to correspond vertical market standard, such as railway EMC – EN50121-4.
Digital Input
Digital Input (Hi): DC 11V~30V
Digital Input (Low): DC 10V~0V
Supports sink type signal input with photo-coupler isolation
Relay Output
Dry Relay output: 0.5A / DC 24V.
Supports Multiple Events Binding trigger function
LED Indicators
Power: Green On: (System power applied) 
D.I.: Green On (digital signal high level is detected) 
D.O.: Red On. (relay active and form as)
Sys: Green On (System Ready), Blinking ( System perform firmware upgrade
R.S. (Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed)
LNK (Link): Green on, ACT (Active): Green Blinking 
PoE: Yellow on ( PoE is applying power)

Power Requirements
System power inquire
Input Range: DC 46~57V; Inrush Current: 64/ DC 46V input, 76.4A/DC 57V input.
Power system sype
Passive power source.
Power consumption
15Watts without PD loading.

Mechanical
Installation
Din-Rail mounting
Case
Steel metal with Aluminum heat-dissipate panel housing 
Ingress Protection – grade 30
Dimensions
95 (W) x 127 (D) x 160 (H) w/o DIN Rail clip 
95 (W) x 136.2 (D) x 160 (H) w/ DIN Rail clip

Technology
Standard
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3u 100 Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000 Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High power Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol

System Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput
8.3Mega packet per second
CPU performance
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
System Memory
8M bytes flash ROM, 64M bytes SDRAM.
Transfer packet size
64 bytes to 1522 bytes (includes double VLAN tag).
MAC Address
8K MAC address table.
Packet Buffer
1M bits shared memory for packet buffer.
Transfer performance
14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
Environment Monitoring
Embedded board-level thermal detector for system temperature monitoring.

System Management
Configuration and monitoring interface
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface. 
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
Telnet & Local Console
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
SNMP
v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
SNMP MIB
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.
Korenix Utility
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
Network Time Protocol(NTP)
Supports NTP protocol with daylight saving function and localize time sync function.
Management IP Security
IP address security to prevent unauthorized access
E-mail Warning
4 receipt E-mail accounts with mail server authentication
System Log
Supports both Local or remote Server with authentication

Network Performance
Port Configuration
Port link Speed, Link mode, current status and enable/disable.
Port Trunk
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
VLAN
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes- Trunk, Hybrid and Link access.
Private VLAN
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN.
IEEE802.1 QinQ
Supports Double VLAN Tag function for implementing Metro Network topologies.
Class of Service
IEEE 802.1p class of service; per port 4 priority queues.
Traffic Prioritize
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
IGMP Snooping
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port.
Rate Control
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Port security to assign authorized MAC to specific port
DHCP
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82).
IEEE 802.1x
Port based network access control and user authentication by radius account, password and key for the radius server authentication.

Power Over Ethernet
PoE Standards
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
PoE Operating Mode
Auto mode:Auto detects and powering by IEEE 802.3af / IEEE 802.3at 2-Event behaviors 
Forced mode: User configured power consumption without detection, classification
PoE forwarding conductor
V+: RJ-45 conductor 3,6 
V-: RJ-45 conductor 1,2
PoE Forwarding ability
IEEE 802.3af: 15.4W/per port
IEEE 802.3at: 30W/per port
PoE System Power Budget
80W @ 75oC, 95% Humidity, DC 48V power input
Power Budget Control
Port-based system power budget control with first plug-in high priority mechanism

Network Redundancy
Multiple Super Ring (MSRTM)
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM.
Rapid Dual Homing (RDHTM)
Multiple uplink paths to one or multiple upper switch
TrunkRingTM
Integrates port aggregation function in ring path to get higher throughput ring architecture
MultiRingTM
Couple or multiple rings: JetNet 5310G supports up to 4 100M rings and 2 Gigabit ring in single switch.
Multiple Spanning Tree
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w multiple spanning tree.

Interface
Number of Ports
10/100Mbps PSE port: 8 x RJ-45
Gigabit Ethernet port : 2 x RJ-45 with auto MDI/MDI-X function
100Mbps / 1000Mbps Fiber port:2 x SFP Socket for SFP fiber transceiver with Hot-swappable function.
Console port: 1 x RJ-45 for system configuration 
Digital Input / Relay Output port: 4-Pin removable terminal block connector.
Power input port: 4-Pin removable terminal block connector
Cables
100 Base-TX: 2-pairs UTP/STP/FTP Cat.5 cable, EIA/TIA-568B 100-ohm (100m) 
1000 Base-T: 4-pair UTP/STP/FTP Cat.5e cable, EIA/TIA-568B 100-ohm (100m) 
Uses STP or FTP cable can provide higher electromagnetic resistance to correspond vertical market standard, such as railway EMC – EN50121-4.
Digital Input
Digital Input (Hi): DC 11V~30V
Digital Input (Low): DC 10V~0V
Supports sink type signal input with photo-coupler isolation
Relay Output
Dry Relay output: 0.5A / DC 24V.
Supports Multiple Events Binding trigger function
LED Indicators
Power: Green On: (System power applied) 
D.I.: Green On (digital signal high level is detected) 
D.O.: Red On. (relay active and form as)
Sys: Green On (System Ready), Blinking ( System perform firmware upgrade
R.S. (Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed)
LNK (Link): Green on, ACT (Active): Green Blinking 
PoE: Yellow on ( PoE is applying power)

Power Requirements
System power inquire
Input Range: DC 46~57V; Inrush Current: 64/ DC 46V input, 76.4A/DC 57V input.
Power system sype
Passive power source.
Power consumption
15Watts without PD loading.

Mechanical
Installation
Din-Rail mounting
Case
Steel metal with Aluminum heat-dissipate panel housing 
Ingress Protection – grade 30
Dimensions
95 (W) x 127 (D) x 160 (H) w/o DIN Rail clip 
95 (W) x 136.2 (D) x 160 (H) w/ DIN Rail clip