ANALOG INPUT
![](/pic/punto_elenco.gif)
Resolution: 16 bits, no missing codes
![](/pic/punto_elenco.gif)
Number of channels: 16 single-ended or 8 differential (software selectable per channel)
![](/pic/punto_elenco.gif)
Channel gain queue size: 512
![](/pic/punto_elenco.gif)
Maximum sampling rate: 250 kS/s
![](/pic/punto_elenco.gif)
Programmable gain: 1, 2, 4, 8
![](/pic/punto_elenco.gif)
Bipolar input ranges: Max. : ±10 V, ±5 V, ±2.5 V, ±1.25 V
![](/pic/punto_elenco.gif)
Unipolar input ranges: Max. : 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
![](/pic/punto_elenco.gif)
Offset error: ±1 mV
![](/pic/punto_elenco.gif)
Gain error: ±0.01% of FSR
![](/pic/punto_elenco.gif)
Input coupling: DC
![](/pic/punto_elenco.gif)
Overvoltage protection: Power on: Continuous ±30 V, Power off: Continuous ±15 V
![](/pic/punto_elenco.gif)
Input impedance: 1 GΩ/100 pF
![](/pic/punto_elenco.gif)
CMRR (gain = 1): 83 dB
![](/pic/punto_elenco.gif)
Settling time: 4 µs to 0.01% error
![](/pic/punto_elenco.gif)
-3dB small signal bandwidth (gain = 1): 760 kHz
![](/pic/punto_elenco.gif)
Trigger sources: Software, external digital/analog trigger, SSI bus
![](/pic/punto_elenco.gif)
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
![](/pic/punto_elenco.gif)
FIFO buffer size: 1 k samples
![](/pic/punto_elenco.gif)
Data transfers: Polling, scatter-gather DMA
ANALOG OUTPUT
![](/pic/punto_elenco.gif)
Number of channels: 2 voltage outputs
![](/pic/punto_elenco.gif)
Resolution: 12 bits
![](/pic/punto_elenco.gif)
Output ranges: 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
![](/pic/punto_elenco.gif)
Maximum update rate: 1 µs
![](/pic/punto_elenco.gif)
Slew rate: 20 V/µs
![](/pic/punto_elenco.gif)
Settling time: 3 µs to ±0.5 LSB accuracy
![](/pic/punto_elenco.gif)
Offset error: ±1 mV
![](/pic/punto_elenco.gif)
Gain error: ±0.02 % of max. output
![](/pic/punto_elenco.gif)
Driving capacity: ±5 mA
![](/pic/punto_elenco.gif)
Stability: Any passive load, up to 1500 pF
![](/pic/punto_elenco.gif)
Trigger sources: Software, external digital/analog trigger, SSI bus
![](/pic/punto_elenco.gif)
Trigger modes: Post-trigger, delay-trigger, and repeated trigger
![](/pic/punto_elenco.gif)
FIFO buffer size: 1 k samples
![](/pic/punto_elenco.gif)
Data transfers: Programmed I/O, scatter-gather DMA
DIGITAL I/O
![](/pic/punto_elenco.gif)
Number of channels: 24-CH 8255 programmable input/output
![](/pic/punto_elenco.gif)
Compatibility: 5 V/TTL
![](/pic/punto_elenco.gif)
Data transfers: Programmed I/O
General-Purpose Timer/Counter
![](/pic/punto_elenco.gif)
Number of channels: 2
![](/pic/punto_elenco.gif)
Resolution: 16 bit
![](/pic/punto_elenco.gif)
Compatibility: 5V/TTL
![](/pic/punto_elenco.gif)
Base clock available: 40 MHz, external clock up to 10 MHz
Auto Calibration
![](/pic/punto_elenco.gif)
On-board reference: +5 V
![](/pic/punto_elenco.gif)
Temperature drift: ±2 ppm/°C
![](/pic/punto_elenco.gif)
Stability: ±6 ppm/1000 Hrs
General Specifications
![](/pic/punto_elenco.gif)
Dimensions: 168 mm x 107 mm (not including connectors)
![](/pic/punto_elenco.gif)
Connector: 68-pin VHDCI female x 2
![](/pic/punto_elenco.gif)
Operating temperature: 0 to 55°C
![](/pic/punto_elenco.gif)
Storage temperature: -20 to 70°C
![](/pic/punto_elenco.gif)
Humidity: 5 to 95 %, noncondensing
![](/pic/punto_elenco.gif)
Power requirements: +3.3 V 0.84 A, +12 V 0.604 A typical