DAQ-2208

ANALOG INPUT
Resolution: 12 bits, no missing codes
Number of channels: 96 single-ended or 48 differential (software selectable per channel)
Channel gain queue size: 1024
Maximum sampling rate: 3 MS/s
Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
Bipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V
Unipolar input ranges: 0-10 V, 0-5 V, 0-4 V,  0-2.5 V, 0-1 V, 0-0.5 V, 0-0.4 V, 0-0.1 V
Offset error: ±1 mV
Gain Error: ±0.03% of FSR
Input coupling: DC
Overvoltage protection:
    - Power on: Countinuous ±30 V
    - Power off: Countinuous ±15 V
Input impendance: 1 GO/100pF
CMRR (gain = 1): 90 dB
Setting Time: 4 µs to 0.1% error
-3dB small signal bandwidth (gain = 1): 2 MHz
Trigger sources:  Software, external digital/analog trigger, SSI bus
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfer: polling, scatter-gather DMA

DIGITAL I/O
Numbers of channels: 24-CH 8255 programmable input/output
Compatibility: 5 V/TTL
Data transfers: Programmed I/O

AUTO CALIBRATION
On-board reference: +5 V
Temperature drift: ±2 ppm/°C
Stability: ±6 ppm/1000 Hrs

GENERAL SPECIFICATIONS
Dimensions (not including connectors): 175 x 107 mm
Connector: 68-pin VHDCI female x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Humidity: 5 to 95% noncondensing
Power requirements: +5V 1.3 A typical