❮ ❯ PCI-9222 16-CH 16-bit 250 KS/s Multi-Function DAQ Card with Encoder Input CharacteristicsDownloadTechnical specificationsCharacteristics Recommended for new applications Programmable gains for analog input: ±10V, ±5V, ±2.5V, ±2V, ±1V, ±500mV, ±250mV 2-CH 16-bit simultaneous analog outputs, supporting up to 1 MS/s update rate Programmable function I/O, supporting TTL DIO, 2MHz high-speed DIO, timer/counter, and PWM outputs 2-CH 4 MHz encoder inputs, supporting AB phase, and CW/CCW Dedicated DMA channels for A/D, D/A, and high-speed DIO External digital trigger for A/D, D/A, and high-speed DIO Auto-calibration Get a quote DownloadDownloadUser-Manual-PCI-9222-Rev2.00PCI-9222Technical specificationsTechnical specifications ANALOG INPUT Resolution: 16 Bit Number of channels: 16 SE/ 8 DIFF Maximum sampling rate (single channel): 250 kS/s Programmable Gain: 1, 2, 4, 5, 8, 10, 20, 40 Input Range: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±500 mV, ±250 mV Offset Error: ±2.6 mV typical, before calibration, ±0.5 mV typical, after calibration Gain Error: ±0.2% of FSR, before calibration, ±0.015% of FSR, after calibration -3dB Small Signal Bandwidth (Gain=1): 1.5 MHz System noise (Gain=1): 0.5 mVRMS CMRR (Gain=1): 93.5 dB SFDR (Spurious-free dynamic range, Gain=1): 95 dB SINAD (Signal-to-Noise and Distortion Ratio, Gain=1): 86 dB THD (Total Harmonic distortion, Gain=1): -94 dB SNR (Signal-to-Noise Ratio, Gain=1): 87 dB ENOB (Gain=1) 13.9 bits FIFO Buffer size: 1 k samples Trigger Sources: Software, external digital, SSI Trigger Mode: Post trigger, retrigger, gate trigger External conversion source: Yes (up to 250 kS/s) Input Coupling: DC Over voltage protection: Continuous ±30 V Input impedance: High Impedance > 1GO Data Transfer: Programmed I/O, Interrupt, Bus Mastering DMA ANALOG OUTPUT N° of channels: 2 voltage outputs Resolution: 16-bit Max Update Rate: 1 MHz (simultaneous update) FIFO: 512 Output Range: ±10 V Output Driving capacity: ±5 mA Slew Rate: 20 V/µs Setting Time (0.1% of full scale) 2.6 µs Offset Error: ±0.1 mV Gain error: ±0.1 mV Rising time: 0.67 µs Falling Time: 0.705 µs FUNCTION I/O Mode: Digital I/O, General Timer/Counter, Pulse generation Digital I/O: 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level) General Timer/Counter: Four 32-bit, Base clock: 80 MHz, external to 10 MHz Pulse generation: Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; Duty cycle: 1%-99%) ENCODER INPUT N° of channels: 2(2) Encoder Type: CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder GENERAL SPECIFICATIONS PCI Bus: 5 V and 3.3 V universal PCI bus Auto-calibration: Yes I/O connector: Two 68-pin SCSI-VHDCI female Operation Temperature: 0 to 55°C Storage Temperature: -20 to 70°C Humidity: 5 to 95% non-condensing Power Requirements: +5 V 1.2 A typical +12 V 760 mA typical -12 V 50 mA typical Dimensions: 175 mm x 107 mm (not including connectors) CharacteristicsDownloadTechnical specifications
