❮ ❯ IMBA-R680 ATX motherboard con chipset Intel R680E e socket LGA1700 per processori 12th gen. Intel Core i3 / i5 / i7 / i9, Celeron e Pentium (Alder Lake) CaratteristicheDownloadSpecifiche tecnicheCaratteristiche LGA1700 12th/13th Generation Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® (125W) Dual-channel DDR5 4800MHz DisplayPort 1.4a, HDMI & IDPM modules Two M.2 M key for NVMe storage PCI Express Gen4 & Gen5 expansion slots Chiedi un preventivo DownloadDownloadDatasheet IMBA-R680Specifiche tecnicheSpecifiche tecnicheCPU LGA1700 socket supports 12th/13th generation Alder Lake-S Intel® Core™ i9/i7/i5/i3/ Pentium®/Celeron® Processor (up to 125W TDP CPU) Chipset Intel® R680E BIOS BIOS AMI UEFI BIOS Memory Four 288-pin 4800 MHz dual-channel DDR5 SDRAM unbuffered DIMMs support up to 128GB (ECC & non-ECC supported) Graphics Engine New Intel® Xe Graphics architecture with SRIOV, Genlock Display Output Triple independent display 1 x DP (up to 4096 x 2304 @60Hz) 1 x HDMI (up to 4096 x 2304 @30Hz) 1 x IDPM IEI eDP/ LVDS/ VGA module Ethernet LAN1: Intel® I225V 2.5GbE controller (colay I225-LM support vPro) LAN2: Intel® I225V 2.5GbE controller (colay I225-LM support vPro) External I/O Interface 4 x USB 3.2 Gen 2 (Type-A) (10Gb/s) 2 x USB 3.2 Gen 1 (Type-A) (5Gb/s) 2 x RS-232/422/485 (RS-485 support AFC) Internal I/O Interface 6 x SATA 6Gb/s (RAID 0/1/5/10 supported) 4 x USB 2.0 (2x4 pin, P=2.54) 2 x USB 3.2 Gen 1 (2x10 pin, P=2.00, wafer) (5Gb/s) 4 x RS-232 (2x5 pin, P=2.54) SMBus 1 x SMBus (1x4 pin) I²C 1 x I²C (1x4 pin) Audio 1 x IAUDIO supports IEI AC-KIT-888S Audio Kit (2x5 pin) Front Panel 1 x Front Panel (2x7 pin, Power LED, HDD LED, Speaker, Power Button, Reset Button) LAN LED 2 x LAN LED (1x2 pin) Expansions 2 x PCIe Gen5 x16 slot with x8 Signal 3 x PCIe Gen4 x4 open-end 2 x PCIe Gen3 x1 1 x M.2 M Key (2242/2280, PCIe x4 ) NVMe supported 1 x M.2 M Key (2242/2280, PCIe x2 for SSD) NVMe supported Digital I/O 1 x 12-bit digital I/O (2x7 pin) TPM Intel® PTT (TPM 2.0) Fan Connector 1 x CPU fan connector (1x4 pin) 2 x System fan connector (1x3 pin) Chassis Open 1 x Chassis intrusion (1x2 pin) Power Supply ATX/AT power supply Support AT/ATX mode ErP/EuP Compliant Watchdog Timer Software Programmable support 1~255 sec. System reset Power Consumption TBD Operating Temperature 0°C~60°C Storage Temperature -30°C ~ 70°C Operating Humidity 5% ~95%, non-condensing Dimensions 244mm x 305mm Weight GW:1200g / NW:700g Certification CE/FCC compliant CaratteristicheDownloadSpecifiche tecniche