❮ ❯ eKINO-BT Mini-ITX motherboard con sistema UPS integrato e processori Intel Atom e Celeron (Bay Trail) CaratteristicheDownloadSpecifiche tecnicheCaratteristiche Mini ITX supports Intel® 22nm Atom™ or Celeron® on-board SoC Wide-range 9V ~ 26V DC input design Supports dual independent display with dual LVDS and VGA Equipped with AUPS sub-system, acts as a simple UPS system Supports four USB 2.0, two USB 3.0, two SATA and four COM IEI jumper-less function Chiedi un preventivo DownloadDownloadeKINO-BTUser-Manual-eKINO-BT-Rev1.06Specifiche tecnicheSpecifiche tecniche CPU: Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W) Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W) Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W) Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W) Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W) Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W) Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W) Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W) BIOS AMI UEFI BIOS BIOS version: AIxx is for Bay-trail I model (CPU: E38xx) BIOS version: AMxx is for Bay-trail M/D model (CPU: J1900/ N2930/ N2807) System Memory Two 204-pin 1066/1333MHz dual-channel unbuffered DDR3L SDRAM SO-DIMM supports up to 8 GB (J1900, N2930, E3845, E3827, E3826) or 4 GB (N2807, E3825, E3815) Ethernet Dual LAN: Realtek RTL8111E PCIe controller I/O Interface 4 x RS-232 1 x RS-422/485 1 x CFast slot 2 x SATA with 5V output 4 x USB 2.0 (2 on rear IO, 2 by pin header) 2 x USB 3.0 (rear IO) 1 x 6-pin header for KB/MS Digital I/O 8-bit digital I/O (4-bit input, 4-bit output) Super I/O F81866D-I TPM 1 x TPM connector (2x10 pin) SMBus 1 x 4-pin wafer Audio Realtek ALC662 HD codec 2 x Audio jacks (rear I/O) Front audio: 1 x 10-pin header Expansion 1 x Full-size PCIe Mini card slot (with USB 2.0) 1 x PCIe x1 Watchdog Timer Software programmable supports 1~255 sec. system reset by super I/O Power Supply Input voltage range: 9V ~ 26V Recommended operating input voltage range: 12V~24V 1 x External 4-pin DIN DC jack 1 x Internal 4-pin (2x2) power connector Fan 1 x 4-pin smart fan 1 x 3-pin system fan Power Consumption +12V @1.55A (Intel® Celeron® J1900 CPU, 2 x 4GB 1333 MHz DDR3L memory) Graphic Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2 Operating Temperature 0°C ~ 40°C with AUPS sub-system -20°C ~ 60°C without AUPS sub-system Storage Temperature -10°C ~ 50°C with AUPS sub-system -30°C ~ 70°C without AUPS sub-system Humidity 5% ~ 95%, non-condensing Weight GW: 1100g/NW: 400g CaratteristicheDownloadSpecifiche tecniche
