DAQ-2205 64-CH 16-Bit 500 kS/s Multi-Function DAQ Card CaratteristicheDownloadSpecifiche tecnicheCaratteristiche Supports a 32-bit 3.3 V or 5 V PCI bus 64-CH single-ended or 32-CH differential analog inputs 16-bit A/D resolution On-board 1 K-sample A/D FIFO Bipolar or unipolar analog input ranges Programmable gains: x1, x2, x4, x8 Chiedi un preventivo DownloadDownloadUser-Manual-DAQ-2205-Rev2.01DAQ-2205Specifiche tecnicheSpecifiche tecnicheANALOG INPUT Resolution: 16 bits, no missing codes Number of channels: 64 single-ended or 32 differential (software selectable per channel) Channel gain queue size: 512 Maximum sampling rate: 500 MS/s Programmable gain: 1, 2, 4, 8 Bipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 ± Unipolar input ranges: 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V Offset error: ±1 mV Gain Error: ±0.01% of FSR Input coupling: DC Overvoltage protection: - Power on: Countinuous ±30 V - Power off: Countinuous ±15 V Input impendance: 1 GO/100pF CMRR (gain = 1): 83 dB Setting Time: 2 µs to 0.1% error -3dB small signal bandwidth (gain = 1): 1.6 MHz Trigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfer: polling, scatter-gather DMA ANALOG OUTPUT Number of channels: 2 voltage outputs Resolution: 12 bits Output ranges: 0-10V, ±10 V, 0-AOEXTREF, ±AOEXTREF Maximum update rate: 1 µs Slew rate: 20 V/µs Setting time: 3 µs to ±0.5 LSB accuracy Offset error: ±1 mV Gain error: ±0.02% of max. output Driving capacity: ±5 mA Stability: Any passive load, up to 1500 pF Treigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Post-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfer: Programmed I/O, scatter-ghater DMA DIGITAL I/O Numbers of channels: 24-CH 8255 programmable input/output Compatibility: 5 V/TTL Data transfers: Programmed I/O GENERAL-PURPOSE TIMER/COUNTER Number of channels: 2 Resolution: 16 bit Compatibility: 5 V/TTL Base clock available: 40 MHz, external clock up to 10 MHz AUTO CALIBRATION On-board reference: +5 V Temperature drift: ±2 ppm/1000 Hrs Stability: ±6 ppm/1000 Hrs GENERAL SPECIFICATIONS Dimensions (not including connectors): 175 x 107 mm Connector: 68-pin VHDCI female x 2 Operating temperature: 0 to 55°C Storage temperature: -20 to 80°C Humidity: 5 to 95% noncondensing Power requirements: +5V 1.2 A typical CaratteristicheDownloadSpecifiche tecniche