DAQ-2204 64-CH 12-Bit 3 MS/s Multi-Function DAQ Card CaratteristicheDownloadSpecifiche tecnicheCaratteristiche Supports a 32-bit 3.3 V or 5 V PCI bus 64-CH single-ended or 32-CH differential analog inputs Up to 3 MS/s sampling rate 12-bit A/D resolution On-board 1 K-sample A/D FIFO Bipolar or unipolar analog input ranges Programmable gains: x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 Chiedi un preventivo DownloadDownloadDAQ-2204User-Manual-DAQ-2204-Rev2.01Specifiche tecnicheSpecifiche tecnicheANALOG INPUT Resolution: 12 bits, no missing codes Number of channels: 64 single-ended or 32 differential (software selectable per channel) Channel gain queue size: 512 Maximum sampling rate: 3 MS/s Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 Bipolar input ranges: Max. ±10 V, Min. ±0.05 V Unipolar input ranges: Max. 0-10 V, Min. 0-0.1 V Offset error: ±1 mV Gain Error: ±0.03% of FSR Input coupling: DC Overvoltage protection: - Power on: Countinuous ±30 V - Power off: Countinuous ±15 V Input impendance: 1 GO/100pF CMRR (gain = 1): 90 dB Setting Time: 1 µs to 0.1% error -3dB small signal bandwidth (gain = 1): 2 MHz Trigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfer: polling, scatter-gather DMA ANALOG OUTPUT Number of channels: 2 voltage outputs Resolution: 12 bits Output ranges: 0-10V, ±10 V, 0-AOEXTREF, ±AOEXTREF Maximum update rate: 1 µs Slew rate: 20 V/µs Setting time: 3 µs to ±0.5 LSB accuracy Offset error: ±1 mV Gain error: ±0.02% of max. output Driving capacity: ±5 mA Stability: Any passive load, up to 1500 pF Treigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Post-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfer: Programmed I/O, scatter-ghater DMA DIGITAL I/O Numbers of channels: 24-CH 8255 programmable input/output Compatibility: 5 V/TTL Data transfers: Programmed I/O GENERAL-PURPOSE TIMER/COUNTER Number of channels: 2 Resolution: 16 bit Compatibility: 5 V/TTL Base clock available: 40 MHz, external clock up to 10 MHz AUTO CALIBRATION On-board reference: +5 V Temperature drift: ±2 ppm/1000 Hrs Stability: ±6 ppm/1000 Hrs GENERAL SPECIFICATIONS Dimensions (not including connectors): 175 x 107 mm Connector: 68-pin VHDCI female x 2 Operating temperature: 0 to 55°C Storage temperature: -20 to 80°C Humidity: 5 to 95% noncondensing Power requirements: +5V 1.3 A typical CaratteristicheDownloadSpecifiche tecniche
