Cerca
Filters
Close

JetCon-3401G-V2

Convertitore industriale da Gigabit Ethernet a fibra ottica SFP
Caratteristiche
  1. Converts 10/100/1000TX to 100/1000 Fiber
  2. Flexible SFP Fiber transceiver design
  3. Fault Alert for power
  4. Two way Link loss forwarding
  5. Power redundancy with wide range input
  6. Slim Case with IP-31 grade protection
  7. Wide range operating temperature
  8. Power Redundancy with 10~60V wide voltage input
  9. Railway Certification EN50121-4 Compliance
Produttore:: Korenix Technology

Technology

 

Standard

IEEE802.3 10Base-T IEEE802.3u 100Base-TX/FX IEEE802.3ab 1000Base-T

IEEE802.3z Gigabit Ethernet Fiber IEEE802.3x flow control and back-pressure. IEEE802.1p Class of Service

IEEE802.1Q Quality of Service

Performance

 

Forwarding Technology

Store and Forward technology with 64~10K bytes packet forwarding ability

System Throughput

1.48 Mpps

Packet buffer

1 Mbits

MAC Address

8k

Link Loss Forwarding

Two-way loss-signature auto forwarding, configured by DIP switch

Event Alarm

Configurable relay alarm output for power events

Class of Service

4 queues for each port with 8:1 forwarding scheme for High/Low queue

Quality of Service

Supports Tag based packet priority, IPv4 ToS and IPv6 DSCP

Broadcast filtering

1000Mbps: 20000 frames/per second 100Mbps: 2000frames/per second 10Mbps: 200frames/per second

Interface

 

Ethernet Port – RJ-45

1 x 10/100/1000 Base-TX with Auto MDI/MDI-X function, Auto-Negotiation

1 x SFP socket with hot-swappable function for 100/1000 Ethernet SFP Transceiver

Connectors

10/100/1000 Base-TX: RJ-45

SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output.

Cables

RJ-45 Connector: 4 pairs of Cat-5e UTP/STP cable

Arrangement for 1000Base-T. Maximum link distance is 100meters.

Diagnostic LEDs

System:

-     2 x Power (Green): On (Power On), Off (PowerOff)

-     1 x Link Loss Forwarding (Red): On (Link Loss), Off (DataTransfer)

-     1 x Alarm (Red): On (Disconnect), Off (Connected) RJ-45port:

-     Link/Activity (Green): On (Link), Blinking(Activity)

-     Speed (Amber): On (Speed 1000), Off (Speed 10/100) SFP port:

– Link/Activity (Green): On (Link), Fast Blinking (Speed 1000), Slow Blinking (Speed 100)

DIP Switch

DIP-1 : Power Event alarm Enable/Disable DIP-2 : Fix Speed 100 Mbps

DIP-3 : Link Loss Forward (LLF) Enable/Disable

Power Connector

Removable Terminal Block: 10-60V power Input

Power Requirement

 

Power

Removable Terminal Block: 10-60V power Input

Power input with polarity reverse correction and over current protection.

Power Consumption

2Watts / DC 48V

Mechanical

 

Enclosure Protection

Ingress Protection code – 31

Case

Slim metal case

Mounting

DIN Rail

Dimension

99(D) x30(W)x 120(H) mm (Without Din-rail kit)

Weight

0.9kg with package 0.6kg without package

Environmental

 

Operating Temperature

-40℃~75℃

Operating Humidity

0% ~ 95% non-condensing

Storage Temperature

-40℃~80℃

Storage Humidity

0%~ 95% non-condensing

Approvals

 

EMI

CE/EN 55032 class A, FCC Class A, EN 61000-3-2 :2014, EN 61000-3-3, EN 61000-6-4,

EN50121-4 (Compliance)

EMS

CE/ EN 55024, EN 61000-6-2, IEC 61000-4-2,IEC 61000-4-3, IEC 61000-4-4,

IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11

Safety

Hi-pot Testing – AC 1.5KV

Shock

IEC60068-2-27 (Compliance)

Vibration

IEC60068-2-6 (Compliance)

Free Fall

IEC60068-2-31 (Compliance)

Warranty

5 years

Ordering Information

 

JetCon 3401G

Industrial Gigabit Ethernet Media Converter

Includes

1 x JetCon 3401G V2 Industrial Gigabit Ethernet Media Converter 1 x Quick Installation Guide

Optional Accessories

 

Fiber Transceiver

Gigabit Multi-Mode SFP Transceiver Gigabit Single-Mode SFP Transceiver

Gigabit BIDI/WDM Single-Mode SFP Transceiver 100Base Multi-Mode SFP Transceiver

100Base Single-Mode SFP Transceiver

100Base BIDI/WDM Single-Mode SFP Transceiver

Technology

 

Standard

IEEE802.3 10Base-T IEEE802.3u 100Base-TX/FX IEEE802.3ab 1000Base-T

IEEE802.3z Gigabit Ethernet Fiber IEEE802.3x flow control and back-pressure. IEEE802.1p Class of Service

IEEE802.1Q Quality of Service

Performance

 

Forwarding Technology

Store and Forward technology with 64~10K bytes packet forwarding ability

System Throughput

1.48 Mpps

Packet buffer

1 Mbits

MAC Address

8k

Link Loss Forwarding

Two-way loss-signature auto forwarding, configured by DIP switch

Event Alarm

Configurable relay alarm output for power events

Class of Service

4 queues for each port with 8:1 forwarding scheme for High/Low queue

Quality of Service

Supports Tag based packet priority, IPv4 ToS and IPv6 DSCP

Broadcast filtering

1000Mbps: 20000 frames/per second 100Mbps: 2000frames/per second 10Mbps: 200frames/per second

Interface

 

Ethernet Port – RJ-45

1 x 10/100/1000 Base-TX with Auto MDI/MDI-X function, Auto-Negotiation

1 x SFP socket with hot-swappable function for 100/1000 Ethernet SFP Transceiver

Connectors

10/100/1000 Base-TX: RJ-45

SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output.

Cables

RJ-45 Connector: 4 pairs of Cat-5e UTP/STP cable

Arrangement for 1000Base-T. Maximum link distance is 100meters.

Diagnostic LEDs

System:

-     2 x Power (Green): On (Power On), Off (PowerOff)

-     1 x Link Loss Forwarding (Red): On (Link Loss), Off (DataTransfer)

-     1 x Alarm (Red): On (Disconnect), Off (Connected) RJ-45port:

-     Link/Activity (Green): On (Link), Blinking(Activity)

-     Speed (Amber): On (Speed 1000), Off (Speed 10/100) SFP port:

– Link/Activity (Green): On (Link), Fast Blinking (Speed 1000), Slow Blinking (Speed 100)

DIP Switch

DIP-1 : Power Event alarm Enable/Disable DIP-2 : Fix Speed 100 Mbps

DIP-3 : Link Loss Forward (LLF) Enable/Disable

Power Connector

Removable Terminal Block: 10-60V power Input

Power Requirement

 

Power

Removable Terminal Block: 10-60V power Input

Power input with polarity reverse correction and over current protection.

Power Consumption

2Watts / DC 48V

Mechanical

 

Enclosure Protection

Ingress Protection code – 31

Case

Slim metal case

Mounting

DIN Rail

Dimension

99(D) x30(W)x 120(H) mm (Without Din-rail kit)

Weight

0.9kg with package 0.6kg without package

Environmental

 

Operating Temperature

-40℃~75℃

Operating Humidity

0% ~ 95% non-condensing

Storage Temperature

-40℃~80℃

Storage Humidity

0%~ 95% non-condensing

Approvals

 

EMI

CE/EN 55032 class A, FCC Class A, EN 61000-3-2 :2014, EN 61000-3-3, EN 61000-6-4,

EN50121-4 (Compliance)

EMS

CE/ EN 55024, EN 61000-6-2, IEC 61000-4-2,IEC 61000-4-3, IEC 61000-4-4,

IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11

Safety

Hi-pot Testing – AC 1.5KV

Shock

IEC60068-2-27 (Compliance)

Vibration

IEC60068-2-6 (Compliance)

Free Fall

IEC60068-2-31 (Compliance)

Warranty

5 years

Ordering Information

 

JetCon 3401G

Industrial Gigabit Ethernet Media Converter

Includes

1 x JetCon 3401G V2 Industrial Gigabit Ethernet Media Converter 1 x Quick Installation Guide

Optional Accessories

 

Fiber Transceiver

Gigabit Multi-Mode SFP Transceiver Gigabit Single-Mode SFP Transceiver

Gigabit BIDI/WDM Single-Mode SFP Transceiver 100Base Multi-Mode SFP Transceiver

100Base Single-Mode SFP Transceiver

100Base BIDI/WDM Single-Mode SFP Transceiver