Cerca
Filters
Close

JetNet-3010G

Switch ethernet industriale da 10 porte con 3 porte Gigabit RJ45/SFP (unmanaged)
Caratteristiche
  • 7x 10/100 TX ports and 3x Gigabit RJ-45/SFP combo ports
  • 32Gbps Switch Fabric with excellent data exchange performance
  • Auto Gigabit RJ-45/SFP module detection
  • IEEE 802.1p for Quality of Service (QoS)
  • Aluminum case with IP-31 grade protection
  • -20~70°C operating temperature
Produttore:: Korenix Technology

Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service

Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes (with VLAN Tag)
MAC Address
8K MAC address table
System Packet Buffer
1Mbits shared packet buffer
Quality of Service
Compliance with IEEE802.1p class of service with Tag Based Priority rule Per switch port provides 4 priority queues with 8 (Higher):4(High):2(Low):1(Lower) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)

Interface
Configuration
7 x 10/100 Base-TX with Auto MDI/MDI-X function Auto-Negotiation
3 x 1000Base-T supports Auto MDI/MDI-X , Auto-Negotiation function and combo with Small Form Factor Package (SFP) socket
Connectors
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP: supports all 3.3v SFP type Gigabit fiber transceiver
Power: 4-Pin Removable Terminal Block connector
Cables
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Diagnostic LED
System Power: Power 1 (Green), Power 2 (Green)
10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow)
port: Link/Activity(Green)
1000Base-T RJ-45 port: Link/Activity (Green)
SFP port: Link/Activity (Green)

Power Requirements
Power Supply
4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and redundant function
Power Consumption
11.5 Watts @ DC 24V(Maximum)

Mechanical
Installation
DIN-Rail mount or Wall Mount
Casing
Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
Dimensions
137.85mm(H) x 96mm (W) x 132mm (D)( with DIN rail clip)
Dimensions
0.875g without package

Environmental
Operating Temperature
-20 to 70°C
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C
Storage Humidity
0%~ 95%, (non-condensing)
Hi-Pot
1.2KV on port to port and port to power

Regulatory Approvals
EMI
EN55022 CLASS A, EN61000-3-2, EN61000-3-3, EN61000-6-4
EMS
EN55024, EN61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-6-2
Safety
UL/cUL 60950
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
267380 hours @ 25°C
Warranty
5 years

Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service

Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes (with VLAN Tag)
MAC Address
8K MAC address table
System Packet Buffer
1Mbits shared packet buffer
Quality of Service
Compliance with IEEE802.1p class of service with Tag Based Priority rule Per switch port provides 4 priority queues with 8 (Higher):4(High):2(Low):1(Lower) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)

Interface
Configuration
7 x 10/100 Base-TX with Auto MDI/MDI-X function Auto-Negotiation
3 x 1000Base-T supports Auto MDI/MDI-X , Auto-Negotiation function and combo with Small Form Factor Package (SFP) socket
Connectors
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP: supports all 3.3v SFP type Gigabit fiber transceiver
Power: 4-Pin Removable Terminal Block connector
Cables
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Diagnostic LED
System Power: Power 1 (Green), Power 2 (Green)
10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow)
port: Link/Activity(Green)
1000Base-T RJ-45 port: Link/Activity (Green)
SFP port: Link/Activity (Green)

Power Requirements
Power Supply
4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and redundant function
Power Consumption
11.5 Watts @ DC 24V(Maximum)

Mechanical
Installation
DIN-Rail mount or Wall Mount
Casing
Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
Dimensions
137.85mm(H) x 96mm (W) x 132mm (D)( with DIN rail clip)
Dimensions
0.875g without package

Environmental
Operating Temperature
-20 to 70°C
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C
Storage Humidity
0%~ 95%, (non-condensing)
Hi-Pot
1.2KV on port to port and port to power

Regulatory Approvals
EMI
EN55022 CLASS A, EN61000-3-2, EN61000-3-3, EN61000-6-4
EMS
EN55024, EN61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-6-2
Safety
UL/cUL 60950
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
267380 hours @ 25°C
Warranty
5 years