Search
Filters
Close

EGPC-B201

M.2 2280 or 2260 B+M Key card with 2x isolated CAN Bus port
Caratteristiche
  • Alternative M.2 2260 or 2280 B-M key
  • CANbus 2.0B backward compatible with 2.0A
  • baud rate 100/125/250/500(default)/800/1000K
  • Supports CAN message acceptance filter
  • Keeps configuration after hardware reboot
  • Up to 6000 CAN messages per second (receive data)
  • Supports Listen-only mode
  • Additional driver to support Linux SocketCAN
  • Supports SAE J1939 high layer protocol (Optional)
  • Termination resistor enabled/disabled by jumper
  • Complies with EN61000-4-5 2.5kV surge protection
  • Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
  • Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
  • 30μ” golden finger, 3-year warranty
  • Supports -40 to +85 degrees
Manufacturer: Innodisk Corporation

Module Name

M.2 2260/2280 B-M

Module Type

M.2 to Dual Isolated CANbus 2.0B / J1939 Module

Function

CANbus

Form Factor

Factor M.2 2260/2280 B-M

Input I/F

PCI Express 2.0 x 1

Output I/F

CANbus 2.0B

Output connector

DB-9 x 2

Power Consumption

2.69W (3.3V, 815mA)

Dimensions (W x L x H/mm)

22 x 60/80 x 8.05

Temperature

STD temp: 0°~70°C
Wide temp: -40°~85°C

Environment

Vibration: 5G @7~2000Hz
Shock: 50G @ 0.5ms

Notes

Download driver and API (the same as EMUC-B202) from MyInnodisk website.
Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver),
Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit QNX: 6.6

Download

Module Name

M.2 2260/2280 B-M

Module Type

M.2 to Dual Isolated CANbus 2.0B / J1939 Module

Function

CANbus

Form Factor

Factor M.2 2260/2280 B-M

Input I/F

PCI Express 2.0 x 1

Output I/F

CANbus 2.0B

Output connector

DB-9 x 2

Power Consumption

2.69W (3.3V, 815mA)

Dimensions (W x L x H/mm)

22 x 60/80 x 8.05

Temperature

STD temp: 0°~70°C
Wide temp: -40°~85°C

Environment

Vibration: 5G @7~2000Hz
Shock: 50G @ 0.5ms

Notes

Download driver and API (the same as EMUC-B202) from MyInnodisk website.
Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver),
Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit QNX: 6.6