Search
Filters
Close

PCI-6308V

8-CH, 12-Bit Isolated Analog Output Cards
Caratteristiche
  • Supports a 32-bit 5 V PCI bus
  • Isolated 8-CH 12-bit voltage output
  • 2500 VRMS optical isolation
  • Jumper selectable bipolar and unipolar output ranges
  • 4-CH isolated DI and 4-CH isolated DO
Manufacturer: Adlink Technology Inc.

ISOLATED ANALOG OUTPUT

Number of channel: 8 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar: ±10 V
    - Unipolar: 0 to 10 V, 0 to EXTREF
Setting time: 16µs typical (20V step)
Maximum update interval: 90µs for four channel simultaneously
Gain error: ±0.2% maximum
DNL:
±1 LSB typical
Output driving capacity:
±5 mA
Output initial status:
0 V (after RESET or POWER-ON)
Data transfer:
programmed I/O

ISOLATED DIGITAL INPUT
Number of channels: 4
Maximum input range: 24 V, non-polarity
Digital logic level:
    - Input high voltage: 5-24 V
    - Input low voltage: 0-1.5 V
Input resistance: 2.4 kO @ 0.5 W
Isolation voltage: 2,500 VRMS
Data transfers: programmed I/O

ISOLATED DIGITAL OUTPUT
Number of channel: 4
Output type: photo-coupler transistor
Supply voltage: 5 to 35 V
Sink current: 50 mA maximum
  Isolation voltage: 2,500 VRMS
Data transfer: programmed I/O

GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 220 mA typical, +12V 175 mA typical
Dimensions (not including connectors): 175 x 107 mm

ISOLATED ANALOG OUTPUT

Number of channel: 8 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar: ±10 V
    - Unipolar: 0 to 10 V, 0 to EXTREF
Setting time: 16µs typical (20V step)
Maximum update interval: 90µs for four channel simultaneously
Gain error: ±0.2% maximum
DNL:
±1 LSB typical
Output driving capacity:
±5 mA
Output initial status:
0 V (after RESET or POWER-ON)
Data transfer:
programmed I/O

ISOLATED DIGITAL INPUT
Number of channels: 4
Maximum input range: 24 V, non-polarity
Digital logic level:
    - Input high voltage: 5-24 V
    - Input low voltage: 0-1.5 V
Input resistance: 2.4 kO @ 0.5 W
Isolation voltage: 2,500 VRMS
Data transfers: programmed I/O

ISOLATED DIGITAL OUTPUT
Number of channel: 4
Output type: photo-coupler transistor
Supply voltage: 5 to 35 V
Sink current: 50 mA maximum
  Isolation voltage: 2,500 VRMS
Data transfer: programmed I/O

GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 220 mA typical, +12V 175 mA typical
Dimensions (not including connectors): 175 x 107 mm