Search
Filters
Close

DAQe-2208

96-CH 12-bit 3 MS/s High-Density PCI Express® Analog Input Card
Caratteristiche
  • x1 lane PCI Express Interface
  • 96-CH single-ended or 48-CH differential analog inputs
  • Onboard 1 k-sample A/D FIFO
  • Bipolar or unipolar analog input ranges
  • Programmable gains of x1, x2, x4, x5, x8, x10, x20, x40, x50, x200
  • 1024-configuration channel gain queue
Manufacturer: Adlink Technology Inc.
ANALOG INPUT
 Resolution: 12 bits, no missing codes
 Number of channels: 96 single-ended or 48 differential (software selectable per channel)
 Channel gain queue size: 1024
 Maximum sampling rate: 3 MS/s
 Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
 Bipolar input ranges: Max. : ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V
 Unipolar input ranges: Max. : 0-10 V, 0-5 V, 0-4 V, 0-2.5 V, 0-1 V, 0-0.5 V, 0-0.4 V, 0-0.1 V
 Offset error: ±1 mV
 Gain error: ±0.03 % of FSR
 Input coupling: DC
 Overvoltage protection: Power on: Power on: Continuous ±30 V, Power off: Continuous ±15 V
 Input impedance: 1 GΩ/100 pF
 CMRR (gain = 1): 90 dB
 Settling time: 1 µs to 0.1 % error
 -3dB small signal bandwidth (gain = 1): 2 MHz
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Polling, scatter-gather DMA

DIGITAL I/O
 Number of channels: 24-CH 8255 programmable input/output
 Compatibility: 5 V/TTL
 Data transfers: Programmed I/O

Auto Calibration
 On-board reference: +5 V
 Temperature drift: ±2 ppm/°C
 Stability: ±6 ppm/1000 Hrs

General Specifications
 Dimensions: 168 mm x 107 mm (not including connectors)
 Connector: 68-pin VHDCI female x 2
 Operating temperature: 0 to 55°C
 Storage temperature: -20 to 70°C
 Humidity: 5 to 95 %, noncondensing
 Power requirements: +3.3 V 0.81 A, +12 V 0.568 A typical
ANALOG INPUT
 Resolution: 12 bits, no missing codes
 Number of channels: 96 single-ended or 48 differential (software selectable per channel)
 Channel gain queue size: 1024
 Maximum sampling rate: 3 MS/s
 Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
 Bipolar input ranges: Max. : ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V
 Unipolar input ranges: Max. : 0-10 V, 0-5 V, 0-4 V, 0-2.5 V, 0-1 V, 0-0.5 V, 0-0.4 V, 0-0.1 V
 Offset error: ±1 mV
 Gain error: ±0.03 % of FSR
 Input coupling: DC
 Overvoltage protection: Power on: Power on: Continuous ±30 V, Power off: Continuous ±15 V
 Input impedance: 1 GΩ/100 pF
 CMRR (gain = 1): 90 dB
 Settling time: 1 µs to 0.1 % error
 -3dB small signal bandwidth (gain = 1): 2 MHz
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Polling, scatter-gather DMA

DIGITAL I/O
 Number of channels: 24-CH 8255 programmable input/output
 Compatibility: 5 V/TTL
 Data transfers: Programmed I/O

Auto Calibration
 On-board reference: +5 V
 Temperature drift: ±2 ppm/°C
 Stability: ±6 ppm/1000 Hrs

General Specifications
 Dimensions: 168 mm x 107 mm (not including connectors)
 Connector: 68-pin VHDCI female x 2
 Operating temperature: 0 to 55°C
 Storage temperature: -20 to 70°C
 Humidity: 5 to 95 %, noncondensing
 Power requirements: +3.3 V 0.81 A, +12 V 0.568 A typical