Search
Filters
Close

ACL-8112DG

16-CH, 12-Bit, 100 kS/s Multi-Function DAQ Cards
Caratteristiche
  • 12-bit A/D resolution
  • Up to 100 kS/s sampling rate
  • 16-CH single-ended or 8-CH differential inputs
  • Bipolar or unipolar analog input ranges
  • Automatic analog input scanning
  • DMA for analog inputs
  • 2-CH 12-bit multiplying analog outputs
Manufacturer: Adlink Technology Inc.
ANALOG INPUT
Number of channels:16 single-ended or 8 differential
Resolution: 12 bits
Conversion time: 10 µs
Maximum sampling rate: 100 kS/s
Input signal ranges (software programmable):
 
Gain Input range
Bipolar Unipolar
0.5 ±10 V  
1 ±5 V 0 to 10 V
2 ±2.5 V 0 to 5 V
4 ±1.25 V 0 to 2.5 V
8 ± 0.625 V 0 to 1.25 V

Accuracy

Gain Accuracy
1 0.01% of FSR ± 1 LSB
2, 4 0.02% of FSR ± 1 LSB
8, 16 0.04% of FSR ± 1 LSB

Input coupling: DC
Overvoltage protection: continuous ±35 V
Input impendance: 1 G O
Trigger models: software, pacer, and external trigger (5V/TTL compatible)
FIFO buffer size: 1k samples
Data transfers: polling, interrupt, DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar ±10V, ±5 V, ±EXTREF
    - Unipolar 0 to 10V, 0 to 5 V, 0 to EXTREF
Output driving capacity: 0.8  mA max
Setting Time: 30 µs
Data Transfer: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5 V/TTL
Data transfer: programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of Channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2MHz, external clock to 10 MHz

GENERAL SPECIFICATION
I/O connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 55° C
Storage Temperature: -20 to 80° C
Relative humidity: 5 to 95%, non condensing
Power requirements: +5V 430 mA typical, +12V 150 mA typical
Dimension (not including connectors): 163 x 115mm

ANALOG INPUT
Number of channels:16 single-ended or 8 differential
Resolution: 12 bits
Conversion time: 10 µs
Maximum sampling rate: 100 kS/s
Input signal ranges (software programmable):
 
Gain Input range
Bipolar Unipolar
0.5 ±10 V  
1 ±5 V 0 to 10 V
2 ±2.5 V 0 to 5 V
4 ±1.25 V 0 to 2.5 V
8 ± 0.625 V 0 to 1.25 V

Accuracy

Gain Accuracy
1 0.01% of FSR ± 1 LSB
2, 4 0.02% of FSR ± 1 LSB
8, 16 0.04% of FSR ± 1 LSB

Input coupling: DC
Overvoltage protection: continuous ±35 V
Input impendance: 1 G O
Trigger models: software, pacer, and external trigger (5V/TTL compatible)
FIFO buffer size: 1k samples
Data transfers: polling, interrupt, DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar ±10V, ±5 V, ±EXTREF
    - Unipolar 0 to 10V, 0 to 5 V, 0 to EXTREF
Output driving capacity: 0.8  mA max
Setting Time: 30 µs
Data Transfer: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5 V/TTL
Data transfer: programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of Channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2MHz, external clock to 10 MHz

GENERAL SPECIFICATION
I/O connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 55° C
Storage Temperature: -20 to 80° C
Relative humidity: 5 to 95%, non condensing
Power requirements: +5V 430 mA typical, +12V 150 mA typical
Dimension (not including connectors): 163 x 115mm