Cerca
Filters
Close

Spiacenti, questo prodotto non é più disponibile

JetNet-6710G-M12

Industrial 8 PoE + 2G Managed High Power IEEE802.3at PoE Switch

Caratteristiche
  1. 8x 10/100 Base TX PoE ports and 2 Gigabit uplink ports
  2. Solid M12 D-coded Ethernet connectors
  3. support 15.4W IEEE 802.3af & 30W high power IEEE 802.3at
  4. Total power budget is 200W by IEEE 802.3at
  5. RSR with 5ms recovery time
  6. MSR for up to 4 x 100M Rings plus 1 Gigabit Ring
  7. IEEE 802.1AB LLDP
  8. Optional Korenix NMS software for auto-topology
  9. Tag-VLAN for multiple VLAN isolation and QinQ for private VLAN
  10. LACP port trunk for bandwidth aggregation
  11. Auto thermal detection and power budget control
  12. Redundant DC Power Inputs and Relay Output
  13. AC 1.5KV Hi-Pot Isolation Protection for ports and power
  14. EN 50121-4 EMC certification for railway installations
  15. Wide operating temperature -40°~60°C (802.3at)
Produttore:: Korenix Technology

Technology
Standard
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1 QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol

Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput
8.3 Mpps@64 Bytes
CPU performance
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
System Memory
8M bytes flash ROM, 64M bytes SDRAM.
Transfer packet size
64 bytes to 1522 bytes (includes double VLAN tag).
MAC Address
8K MAC address table.
Packet Buffer
1M bits shared memory for packet buffer.
Transfer performance
14,880pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
Environment Monitoring
Embedded board-level thermal detector for system temperature monitoring.
Relay Alarm
Dry Relay output with 1A /30V DC

Management
Configuration and monitoring interface
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm reboot, reset to default, Admin password, Port Speed/ Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
Telnet & Local Console
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
SNMP
v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
SNMP MIB
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.
Korenix Utility
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
Network Time Protocol(NTP)
Supports NTP protocol with daylight saving function and localize time sync function.
Management IP Security
IP address security to prevent unauthorized access
E-mail Warning
4 receipt E-mail accounts with mail server authentication
System Log
Supports both of Local or remote Server with authentication

Network Performance
Port Configuration
Port link Speed, Link mode, current status and enable/disable.
Port Trunk
IEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
VLAN
IEEE 802.1Q VLAN with GVRP. 256 VLAN Entries, VLAN ID from 1 to 4094 Supports Trunk, Hybrid and Link access modes.
Private VLAN
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN.
IEEE 802.1 QinQ
Double VLAN Tag in an Ethernet frame
Class of Service
IEEE 802.1p class of service; per port 4 priority queues.
Traffic Prioritize
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
IGMP Snooping
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port.
Rate Control
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Port security to assign authorized MAC to specific port
DHCP
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82).
IEEE 802.1x
Port based network access control and user authentication by radius account, password and key for the radius server authentication.

Power Over Ethernet
PoE Standard
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
PoE Operating Mode
Auto mode:Auto detects and powering by IEEE 802.3af behaviors and IEEE 802.3at 1-Event plus LLDP protocol for high power.
Forced mode: User configured power consumption without detection, classification
PoE forwarding conductor
M12 D-code: V+ (3,4), V- (1,2)
PoE Forwarding ability
IEEE 802.3af: 15.4W
IEEE 802.3at: 30W
Power Budget Control
Port Based budget control with priority control, system will auto calculate total power and shut down low priority port when drawing current is over the power supply

Network Redundancy
Multiple Super Ring (MSRTM)
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM.
Rapid Dual Homing (RDHTM)
Multiple uplink paths to one or multiple upper switch
TrunkRingTM
Integrate port aggregation function in ring path to get higher throughput ring architecture
MultiRingTM
Support up to 4 100M rings and 1 Gigabit ring in single switch.
Multiple Spanning Tree
IEEE802.1s MSTP, each MSTP instance can include one or more VLANs. Supports multiple RSTP deployed in a VLAN or multiple VLANs.

Interface
Number of Ports
10/100 TX port: 8 x M12-D-Code 4-pin Female
Gigabit port: 2 x M12-A-Code 8-pin Female
Console port & Alarm Relay Output: 
M12 A-code Male for RS-232 and relay alarm output.
Power port: CTG-4F 4-pin Rugged IP-67 Connector
Cables
100 Base-TX: 4-pair UTP/STP Cat.5e/Cat.6, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat.5e/Cat.6, EIA/TIA-568B 100-ohm (100m)
RS-232 & Alarm Output
RS232: M12 A-code female 5-pin connector, TxD (Pin 1), RxD(Pin 2), Signal Ground (Pin 5)
Alarm Output: M12 A-code female 5-pin connector 3, 4
LED Indicators
100Mbps RJ-45: Link (Green on ) / Activity (Green Blinking),
Gigabit Copper: Link (Green on) / Activity (Green Blinking)
PoE port:
IEEE 802.3af (Green on: Power forwarding; Blinking: PoE Detection)
IEEE 802.3at (Blue on: Power forwarding; Blinking: PoE Detection)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Green On)
Ring Status: Green on (Ring normal) / Blinking (Ring with wrong port), Amber on (Ring abnormal) / Blinking (device's ring port failed)
Power input interface
Redundant power input
Digital Alarm Output
Dry Alarm Relay output integrated within RS-232 (pin 3 & 4)
Alarm Relay activate once pre-configured event occurred.

Power Requirements
System Power
Input Voltage: DC 48~57V, redundant input with reverse protection
Power Consumption: 13W@DC 48V without PD loading.

Mechanical
Installation
Wall Mount
Case
Steel metal case
Dimensions
198 (W) x 145.2 (H) x 74 (D) w/o mounting kit
230.6 (W) x 145.2 (H) x 74 (D) w/mounting kit
Weight
1.92kg

Environmental
Operating Temperature

Technology
Standard
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1 QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol

Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput
8.3 Mpps@64 Bytes
CPU performance
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
System Memory
8M bytes flash ROM, 64M bytes SDRAM.
Transfer packet size
64 bytes to 1522 bytes (includes double VLAN tag).
MAC Address
8K MAC address table.
Packet Buffer
1M bits shared memory for packet buffer.
Transfer performance
14,880pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
Environment Monitoring
Embedded board-level thermal detector for system temperature monitoring.
Relay Alarm
Dry Relay output with 1A /30V DC

Management
Configuration and monitoring interface
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm reboot, reset to default, Admin password, Port Speed/ Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
Telnet & Local Console
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
SNMP
v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
SNMP MIB
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.
Korenix Utility
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
Network Time Protocol(NTP)
Supports NTP protocol with daylight saving function and localize time sync function.
Management IP Security
IP address security to prevent unauthorized access
E-mail Warning
4 receipt E-mail accounts with mail server authentication
System Log
Supports both of Local or remote Server with authentication

Network Performance
Port Configuration
Port link Speed, Link mode, current status and enable/disable.
Port Trunk
IEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
VLAN
IEEE 802.1Q VLAN with GVRP. 256 VLAN Entries, VLAN ID from 1 to 4094 Supports Trunk, Hybrid and Link access modes.
Private VLAN
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN.
IEEE 802.1 QinQ
Double VLAN Tag in an Ethernet frame
Class of Service
IEEE 802.1p class of service; per port 4 priority queues.
Traffic Prioritize
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
IGMP Snooping
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port.
Rate Control
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Port security to assign authorized MAC to specific port
DHCP
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82).
IEEE 802.1x
Port based network access control and user authentication by radius account, password and key for the radius server authentication.

Power Over Ethernet
PoE Standard
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
PoE Operating Mode
Auto mode:Auto detects and powering by IEEE 802.3af behaviors and IEEE 802.3at 1-Event plus LLDP protocol for high power.
Forced mode: User configured power consumption without detection, classification
PoE forwarding conductor
M12 D-code: V+ (3,4), V- (1,2)
PoE Forwarding ability
IEEE 802.3af: 15.4W
IEEE 802.3at: 30W
Power Budget Control
Port Based budget control with priority control, system will auto calculate total power and shut down low priority port when drawing current is over the power supply

Network Redundancy
Multiple Super Ring (MSRTM)
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM.
Rapid Dual Homing (RDHTM)
Multiple uplink paths to one or multiple upper switch
TrunkRingTM
Integrate port aggregation function in ring path to get higher throughput ring architecture
MultiRingTM
Support up to 4 100M rings and 1 Gigabit ring in single switch.
Multiple Spanning Tree
IEEE802.1s MSTP, each MSTP instance can include one or more VLANs. Supports multiple RSTP deployed in a VLAN or multiple VLANs.

Interface
Number of Ports
10/100 TX port: 8 x M12-D-Code 4-pin Female
Gigabit port: 2 x M12-A-Code 8-pin Female
Console port & Alarm Relay Output: 
M12 A-code Male for RS-232 and relay alarm output.
Power port: CTG-4F 4-pin Rugged IP-67 Connector
Cables
100 Base-TX: 4-pair UTP/STP Cat.5e/Cat.6, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat.5e/Cat.6, EIA/TIA-568B 100-ohm (100m)
RS-232 & Alarm Output
RS232: M12 A-code female 5-pin connector, TxD (Pin 1), RxD(Pin 2), Signal Ground (Pin 5)
Alarm Output: M12 A-code female 5-pin connector 3, 4
LED Indicators
100Mbps RJ-45: Link (Green on ) / Activity (Green Blinking),
Gigabit Copper: Link (Green on) / Activity (Green Blinking)
PoE port:
IEEE 802.3af (Green on: Power forwarding; Blinking: PoE Detection)
IEEE 802.3at (Blue on: Power forwarding; Blinking: PoE Detection)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Green On)
Ring Status: Green on (Ring normal) / Blinking (Ring with wrong port), Amber on (Ring abnormal) / Blinking (device's ring port failed)
Power input interface
Redundant power input
Digital Alarm Output
Dry Alarm Relay output integrated within RS-232 (pin 3 & 4)
Alarm Relay activate once pre-configured event occurred.

Power Requirements
System Power
Input Voltage: DC 48~57V, redundant input with reverse protection
Power Consumption: 13W@DC 48V without PD loading.

Mechanical
Installation
Wall Mount
Case
Steel metal case
Dimensions
198 (W) x 145.2 (H) x 74 (D) w/o mounting kit
230.6 (W) x 145.2 (H) x 74 (D) w/mounting kit
Weight
1.92kg

Environmental
Operating Temperature