❮ ❯ WSB-BT Full-size PICMG 1.0 slot board con processori Intel Celeron (Bay Trail) CharacteristicsDownloadTechnical specificationsCharacteristics CPU Intel Celeron J1900 e Celeron N2807 ; Fino a 8GB RAM DDR3L 2x LAN, 6x COM, 1x USB 3.0, 6x USB 2.0 Dual Display: LVDS, VGA 2x SATA, 1x mSATA, 1x CF 1x Mini PCIe Get a quote DownloadDownloadWSB-BTUser-Manual-WSB-BT-Rev1.01Technical specificationsTechnical specifications Form Factor PICMG 1.0 CPU Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W) Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W) RAM 1x 204-pin 1333/1066MHz dual-channel DDR3L SDRAM unbuffered DIMM support up to 8GB (J1900) or 4GB (N2807) Graphic Intel® HD Graphics Gen 7 Engines with 4 execution units, supports DX11.1, OpenGL 4.2 and OpenCL1.2 Display Output 1 x VGA (up to 1920x1200@60Hz) 1 x 18/24-bit dual-channel LVDS (up to 1920x1200@60Hz) 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz) Ethernet LAN1: Intel® I211-AT PCIe controller LAN2: Intel® I211-AT PCIe controller Storage 2x SATA 6,0 Gbit/s 1x mSATA 1x CF Card Slot Expansion 1x Full-size PCIe Mini card slot 1x Full-size PCIe Mini card slot (mSATA only) Audio Optional 7.1-channel HD Audio supported by IEI AC-KIT-892HD kit I/O 1x USB 3.0 6x USB 2.0 (1 by rear, 4 by pin header, 1 by 180 degree type A) 4x RS-232 (pin header) 2x RS-232/422/485 (pin header) 1x Keyboard/Mouse (pin header) 1x LPT (pin header) 1x CF Card Slot Type II 1x TPM (pin header) 1x I2C (pin header) 1x SMBus (pin header) 1x Watchdog Timer, Software programmable 1~255 sec. system reset 1x Front Audio (pin header) 1x Digital I/O Fan connector 1x CPU smart fan (1x4 pin), 1x System smart fan (1x3 pin) Operating Temperature -20°C ~ 60°C Relative Humidity 5% ~ 95%, non-condensing BIOS AMI UEFI BIOS Weight GW: 1000g / NW: 260g CharacteristicsDownloadTechnical specifications