PCI-9114A-DG

ANALOG INPUT
Number of channel: 32 single-ended or 16 differential
Resolution: 16 bits
Conversion time: 3.5µs
Maximum sampling rate: 250 kS/s
Input signal ranges: (software programmable)

Gain	Input range
1	±10 V
2	±5 V
4	±2.5 V
8	1.25 V

Accuracy

Gain	Accuracy
1	0.01% of FSR ± 1 LSB
2, 4	0.02% of FSR ± 1 LSB
8	0.04% of FSR ± 1 LSB

Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software, pacer, and external trigger (5 V/TLL compatible)
FIFO buffer size: 1k samples
Data transfer: polling, interrupt

ISOLATED DIGITAL INPUT
Number of channel: 16
Maximum input range: 24v, non polarity
Digital logic levels:
    - 0-24 V, non-polarity
       - Input high voltage: 5-24 V
       - Input low voltage: 0-1.5 V
Input resistance: 2.4 kO @ 0.5 W
Isolation voltage: 2500 VRMS
Data transfers: programmed I/O

ISOLATED DIGITAL OUTPUT
Number of channel: 16
Output type: open emitter Darlington transistors
Sink current:
    - 350 mA for one channel @ 100% duty
    - 260 mA for all channels @ 10% duty
Power dissipation: Max. 1.47 W per chip (8 DO channels)
Supply voltage: 5-35 V
Isolation voltage: 2500 VRMS
Data transfers: programmed I/O

POWER OUTPUT
Output voltage: +12 V and -12 V
Resettable fuse protection: 500 mA

GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2 MHz, external clock to 2MHz

GENERAL SPECIFICATION
I/O Connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 600 mA typical, +12V 100mA typical
Dimensions (not including connectors): 175 x 107 mm