❮ ❯ EGPC-B201 Scheda M.2 2280 o 2260 B+M Key con 2x porte CAN Bus isolate (2.0B / J1939) CharacteristicsDownloadTechnical specificationsCharacteristics Alternative M.2 2260 or 2280 B-M key CANbus 2.0B backward compatible with 2.0A baud rate 100/125/250/500(default)/800/1000K Supports CAN message acceptance filter Keeps configuration after hardware reboot Up to 6000 CAN messages per second (receive data) Supports Listen-only mode Additional driver to support Linux SocketCAN Supports SAE J1939 high layer protocol (Optional) Termination resistor enabled/disabled by jumper Complies with EN61000-4-5 2.5kV surge protection Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV 30μ” golden finger, 3-year warranty Supports -40 to +85 degrees Get a quote DownloadDownloadEGPC-B201-DatasheetTechnical specificationsTechnical specifications Module Name M.2 2260/2280 B-M Module Type M.2 to Dual Isolated CANbus 2.0B / J1939 Module Function CANbus Form Factor Factor M.2 2260/2280 B-M Input I/F PCI Express 2.0 x 1 Output I/F CANbus 2.0B Output connector DB-9 x 2 Power Consumption 2.69W (3.3V, 815mA) Dimensions (W x L x H/mm) 22 x 60/80 x 8.05 Temperature STD temp: 0°~70°C Wide temp: -40°~85°C Environment Vibration: 5G @7~2000Hz Shock: 50G @ 0.5ms Notes Download driver and API (the same as EMUC-B202) from MyInnodisk website. Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit) Linux: Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit QNX: 6.6 CharacteristicsDownloadTechnical specifications
