DAQe-2204 64-CH 12-Bit 3 MS/s Multi-Function PCI Express® DAQ Card CharacteristicsDownloadTechnical specificationsCharacteristics x1 lane PCI Express Interface 64-CH single-ended or 32-CH differential analog inputs Onboard 1 k-sample A/D FIFO Bipolar or unipolar analog input ranges Programmable gains: x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 512-configuration channel gain queue 2-CH 12-bit multiplying analog outputs with waveform generation Get a quote DownloadDownloadDAQe-2204User-Manual-DAQe-2204-Rev2.01Technical specificationsTechnical specifications ANALOG INPUT Resolution: 12 bits, no missing codes Number of channels: 64 single-ended or 32 differential (software selectable per channel) Channel gain queue size: 512 Maximum sampling rate: 3 MS/s Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 Bipolar input ranges: Max. : ±10 V, Min. : ±0.05 V Unipolar input ranges: Max. : 0-10 V, Min. : 0-0.1 V Offset error: ±1 mV Gain error: ±0.03% of FSR Input coupling: DC Overvoltage protection: Power on: Continuous ±30 V, Power off: Continuous ±15 V Input impedance: 1 GΩ/100 pF CMRR (gain = 1): 90 dB Settling time: 1 µs to 0.1% error * -3dB small signal bandwidth (gain = 1): 2 MHz Trigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfers: Polling, scatter-gather DMA ANALOG OUTPUT Number of channels: 2 voltage outputs Resolution: 12 bits Output ranges: 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF Maximum update rate: 1 µs Slew rate: 20 V/µs Settling time: 3 µs to ±0.5 LSB accuracy Offset error: ±1 mV Gain error: ±0.02 % of max. output Driving capacity: ±5 mA Stability: Any passive load, up to 1500 pF Trigger sources: Software, external digital/analog trigger, SSI bus Trigger modes: Post-trigger, delay-trigger, and repeated trigger FIFO buffer size: 1 k samples Data transfers: Programmed I/O, scatter-gather DMA DIGITAL I/O Number of channels: 24-CH 8255 programmable input/output Compatibility: 5 V/TTL Data transfers: Programmed I/O General-Purpose Timer/Counter Number of channels: 2 Resolution: 16 bit Compatibility: 5V/TTL Base clock available: 40 MHz, external clock up to 10 MHz Auto Calibration On-board reference: +5 V Temperature drift: ±2 ppm/°C Stability: ±6 ppm/1000 Hrs General Specifications Dimensions: 168 mm x 107 mm (not including connectors) Connector: 68-pin VHDCI female x 2 Operating temperature: 0 to 55°C Storage temperature: -20 to 70°C Humidity: 5 to 95 %, noncondensing Power requirements: +3.3 V 0.9 A, +12 V 0.564 A typical CharacteristicsDownloadTechnical specifications
