ACL-8111 8-CH, 12-Bit, 50 kS/s Low Cost Multi-Function DAQ Card CharacteristicsDownloadTechnical specificationsCharacteristics 12-bit A/D resolution Up to 50 kS/s sampling rate 8-CH single-ended inputs Programmable gains of x1, x2, x4, x8, x16 Bipolar analog input ranges 1-CH 12-bit monolithic multiplying analog output 16-CH TTL digital inputs and 16-CH TTL digital outputs 3 Programmable A/D trigger modes Get a quote DownloadDownloadACL-8111User-Manual-ACL-8111-Rev2.60Technical specificationsTechnical specificationsANALOG INPUT Number of channels:8 single-ended Resolution: 12 bits Conversion time: 8 µs Maximum sampling rate: 50 kS/s Input signal ranges (software programmable): Gain Input Range 1 ± 1 V 2 ± 2.5 V 4 ± 1.25 V 8 ± 0.625 V 16 ± 0.3125 V Accuracy: 0.015% of FSR ± 1 LSB Input coupling: DC Overvoltage protection: continuous ±35 V Input impendance: 1 GO Trigger models: software, pacer, and external trigger Data transfers: polling, interrupt IRQ level: programmable IRQ 2, 3, 4, 5, 6, 7 ANALOG OUTPUT Number of channels: 1 voltage outputs Resolution: 12 bits Output ranges: 0-5 V, 0-10 V Output driving capacity: 5 mA max Setting Time: 30µs Data Transfer: programmed I/O DIGITAL I/O Number of channels: 16 inputs and 16 outputs Compatibility: 5 V/TTL Data transfer: programmed I/O GENERAL SPECIFICATION I/O connector: - 37-pin D-sub female - 20-pin ribbon male x 2 Operating temperature: 0 to 55° C Storage Temperature: -20 to 80° C Relative humidity: 5 to 95%, non condensing Power requirements: +5V 440 mA typical, +12V 60mA typical Dimension (not including connectors): 158 x 108 mm I/O base address: 16 consecutive address location CharacteristicsDownloadTechnical specifications
