Cerca
Filters
Close

Spiacenti, questo prodotto non é più disponibile

conga-SMC1/SMARC-x86

Carrier board compatta in formato 3.5" per moduli SMARC con architettura x86
Caratteristiche
  1. Compact sized SMARC 2.0 Carrier Board
  2. Support of x86 based SMARC 2.0 Modules
  3. Ready-to-use Carrier Board
  4. Platform for rapid customizing
  5. Support of fast implementation and improved Time-To-Market

Formfactor

3.5" Carrier Board

Board Variant

Application Carrier Board for x86 based SMARC 2.0 modules

Internal Connectors and Features

1x LVDS 18/24bit single/dual channel LVDS
2x optional eDP/DSI (dependent on processor platform)
1x LCD backlight (5V and 12V)
1x SATA Gen3 (support of SATADOM VCC PIN 7 and PIN 8)
1x SATA Power (+5V, +12V)
1x mPCIe full/half size (support for PCIe Gen3 and USB 2.0)
1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0)
1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0)
2x MIPI-CSI 1x Micro SIM (muxed between M.2 Type B and mini PCIe)
2x RS 232/422/485 (COM 0 and COM 2 with handshake)
2x RS232 (COM 1 and COM3 TX/RX only)
2x CAN 1x Micro SD card 1x GPIO connector (up to 8 GPIO)
1x Feature connector (Batlow, Charging, GbE SDP, WD)
1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED)
1x Onboard power button 1x Onboard power state LED
1x SPI/eSPI header
1x I2C header
1x DMIC and analog front panel audio output
1x 12V FAN connector (4-pin)
1x RTC backup (CR2032)
1x Internal DC-In

External Connectors

2x GbE RJ45
2x USB 2.0
2x USB 3.0/3.1
1x HDMI
1x DP++
1x Audio Jack 4-pin with HDA audio ALC888S-VD
1x External DC-In (12-24V)

Power Specification

External and internal DC-In (12-24V Wide Range Carrier Board Supply )

Operating Temperature

Operating Temp.: 0°C … +60°C  |  Storage Temp.: -20°C … +70°C

Humidity

Operating Hum.: 10% - 90% r. H. non cond. |  Storage Hum.: 5% - 95% r. H. non cond.

Size

146 x 102 mm (approx. 5.75" x 4.02")

Order Information

PN 020751 conga-SMC1/SMARC-x86

Formfactor

3.5" Carrier Board

Board Variant

Application Carrier Board for x86 based SMARC 2.0 modules

Internal Connectors and Features

1x LVDS 18/24bit single/dual channel LVDS
2x optional eDP/DSI (dependent on processor platform)
1x LCD backlight (5V and 12V)
1x SATA Gen3 (support of SATADOM VCC PIN 7 and PIN 8)
1x SATA Power (+5V, +12V)
1x mPCIe full/half size (support for PCIe Gen3 and USB 2.0)
1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0)
1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0)
2x MIPI-CSI 1x Micro SIM (muxed between M.2 Type B and mini PCIe)
2x RS 232/422/485 (COM 0 and COM 2 with handshake)
2x RS232 (COM 1 and COM3 TX/RX only)
2x CAN 1x Micro SD card 1x GPIO connector (up to 8 GPIO)
1x Feature connector (Batlow, Charging, GbE SDP, WD)
1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED)
1x Onboard power button 1x Onboard power state LED
1x SPI/eSPI header
1x I2C header
1x DMIC and analog front panel audio output
1x 12V FAN connector (4-pin)
1x RTC backup (CR2032)
1x Internal DC-In

External Connectors

2x GbE RJ45
2x USB 2.0
2x USB 3.0/3.1
1x HDMI
1x DP++
1x Audio Jack 4-pin with HDA audio ALC888S-VD
1x External DC-In (12-24V)

Power Specification

External and internal DC-In (12-24V Wide Range Carrier Board Supply )

Operating Temperature

Operating Temp.: 0°C … +60°C  |  Storage Temp.: -20°C … +70°C

Humidity

Operating Hum.: 10% - 90% r. H. non cond. |  Storage Hum.: 5% - 95% r. H. non cond.

Size

146 x 102 mm (approx. 5.75" x 4.02")

Order Information

PN 020751 conga-SMC1/SMARC-x86