Cerca
Filters
Close

PCI-9221

Low-Cost 16-Bit Multi-Function DAQ Card with 2-CH Encoder Input
Caratteristiche
  • 16-CH single-ended or 8-CH differential analog input
  • Up to 250 kS/s sampling rate
  • 2-CH 16-bit static analog output
  • Recommend TB-9221 Terminal Board for Encoder I/O
  • Supports a 32-bit 3.3 V or 5 V PCI bus
  • Programmable input range: +/-5 V, +/-1 V, +/-0.5 V, +/-0.2 V
  • Programmable function I/O
  • Auto-calibration feature
Produttore:: Adlink Technology Inc.

ANALOG INPUT
 Resolution: 16-bit
 Channel number: 16 SE/8 DI
 Conversion time: 4 µs
 Sampling rate(single channel): 250 kS/s
 FIFO: 1 k sample
 Gain: 1, 5, 10, 25
 Input range: ±5 V, ±1 V, ±500 mV, ±200 mV
 Trigger source: Software, External digital
 Trigger mode: Post trigger
 External conversion source: Yes
 Input coupling: DC
 Overvoltage protection: 27 V
 Input impedance: High impedance, > 1 GΩ
 Data Transfer: Programmed I/O, Interrupt, Bus-mastering DMA

ANALOG OUTPUT
 Number of channels: 2
 Resolution: 16-bit
 Update rate: Static
 Output Range (Programmable): ±5 V
 Output driving capacity: ±5 mA

Multi-function Digital I/O
 Mode: Digital I/O, General Timer/Counter, Pulse Generation, Encoder
* Only one of these mode can be selected
 Digital I/O: 4 DO/ 8 DI (5 V TTL)
 General Timer/Counter: 2 x 32-bit with base clock
40 MHz, external up to 10 MHz
Supported modes:
 Pulse Generation:
- Single pulse generation
- Pulse train generation
 Encoder:
- CW/CCW encoder
- x 1 AB phase encoder
- x 2 AB phase encoder
- x 4 AB phase encoder
 PWM Output:
- Duty cycle: 1-99%
- Mudulation frequency: 20 MHz to 0.005 Hz

General Specifications

 PCI Bus: 5 V & 3.3 V universal PCI bus
 Auto-calibration: Yes (precision source from external)
 Connector: 37-pin D-Sub Connector
 Operation temperature: 0 - 45 °C
 Storage temperature: -20 - 80 °C
 Relative humidity: 5 to 95%, non-condensing
 Dimensions: 120 mm x 87 mm

ANALOG INPUT
 Resolution: 16-bit
 Channel number: 16 SE/8 DI
 Conversion time: 4 µs
 Sampling rate(single channel): 250 kS/s
 FIFO: 1 k sample
 Gain: 1, 5, 10, 25
 Input range: ±5 V, ±1 V, ±500 mV, ±200 mV
 Trigger source: Software, External digital
 Trigger mode: Post trigger
 External conversion source: Yes
 Input coupling: DC
 Overvoltage protection: 27 V
 Input impedance: High impedance, > 1 GΩ
 Data Transfer: Programmed I/O, Interrupt, Bus-mastering DMA

ANALOG OUTPUT
 Number of channels: 2
 Resolution: 16-bit
 Update rate: Static
 Output Range (Programmable): ±5 V
 Output driving capacity: ±5 mA

Multi-function Digital I/O
 Mode: Digital I/O, General Timer/Counter, Pulse Generation, Encoder
* Only one of these mode can be selected
 Digital I/O: 4 DO/ 8 DI (5 V TTL)
 General Timer/Counter: 2 x 32-bit with base clock
40 MHz, external up to 10 MHz
Supported modes:
 Pulse Generation:
- Single pulse generation
- Pulse train generation
 Encoder:
- CW/CCW encoder
- x 1 AB phase encoder
- x 2 AB phase encoder
- x 4 AB phase encoder
 PWM Output:
- Duty cycle: 1-99%
- Mudulation frequency: 20 MHz to 0.005 Hz

General Specifications

 PCI Bus: 5 V & 3.3 V universal PCI bus
 Auto-calibration: Yes (precision source from external)
 Connector: 37-pin D-Sub Connector
 Operation temperature: 0 - 45 °C
 Storage temperature: -20 - 80 °C
 Relative humidity: 5 to 95%, non-condensing
 Dimensions: 120 mm x 87 mm