Cerca
Filters
Close

PCI-9111DG

16-CH, 12-Bit, 100 kS/s Low Cost Multi-Function DAQ Card
Caratteristiche
  • Supports a 32-bit 5 V PCI bus
  • 12-bit A/D resolution
  • 16-CH single-ended analog inputs
  • Up to 100 kS/s sampling rate
  • On-board 1 k-sample A/D FIFO
  • Programmable gains of x1, x2, x4, x8, x16
  • Bipolar analog input ranges
Produttore:: Adlink Technology Inc.

ANALOG INPUT

Number of channel: 16 single-ended
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 100 kS/s
Input signal ranges:
Gain Input range
Bipolar
1 ±10 V
2 ±5 V
4 ±2.5 V
8 ±1.25 V
16 ±0.625 V

Accuracy
Gain Accuracy
1, 2 0.01% of FSR ± 1 LSB
4, 8 0.02% of FSR ± 1 LSB
16 0.04% of FSR ± 1 LSB

Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 10 MO
Trigger modes: software, pacer, and external trigger (5 V/TTL compatible)
FIFO buffer size: 1 k samples
Data transfer: polling, interrupt

ANALOG OUTPUT
Number of channels: 1 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar: ±10V
    - Unipolar: 0 to 10 V
Output driving capacity: ±5 Ma max
Setting time: 30µs
Data transfers: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 autputs
Compatibility: 5 V/TTL
Data transfers: programmed I/O

GENERAL SPECIFICATION
I/O Connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 570 mA typical
Dimensions (not including connectors): 175 x 107 mm

ANALOG INPUT

Number of channel: 16 single-ended
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 100 kS/s
Input signal ranges:
Gain Input range
Bipolar
1 ±10 V
2 ±5 V
4 ±2.5 V
8 ±1.25 V
16 ±0.625 V

Accuracy
Gain Accuracy
1, 2 0.01% of FSR ± 1 LSB
4, 8 0.02% of FSR ± 1 LSB
16 0.04% of FSR ± 1 LSB

Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 10 MO
Trigger modes: software, pacer, and external trigger (5 V/TTL compatible)
FIFO buffer size: 1 k samples
Data transfer: polling, interrupt

ANALOG OUTPUT
Number of channels: 1 voltage outputs
Resolution: 12 bits
Output ranges (jumper selectable):
    - Bipolar: ±10V
    - Unipolar: 0 to 10 V
Output driving capacity: ±5 Ma max
Setting time: 30µs
Data transfers: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 autputs
Compatibility: 5 V/TTL
Data transfers: programmed I/O

GENERAL SPECIFICATION
I/O Connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 570 mA typical
Dimensions (not including connectors): 175 x 107 mm