Cerca
Filters
Close

Spiacenti, questo prodotto non é più disponibile

JetI/O-6550

Modulo I/O su Ethernet con 14 Digital input e 8 Digital output
Caratteristiche
  • 14-Ch Digital Input with DI and Event Counter mode
  • 8-Ch Digital Output with DO and Pulse Output mode
  • Intelligent Condition&Go (IF-Then) logic rules
  • Active events by logic rules or SNMP Trap
  • Flexible peer-to-peer I/O
  • Unicast for network efficiency and true remote I/O
  • Free OPC server and Modbus/TCP support
  • Built-in watchdog timer and real-time clock
  • SNMP / Web for easy configuration and management
  • IP31 grade case protection
  • operating temperature -25°~70°C
Produttore:: Korenix Technology
System
CPU
100MHZ, RISC-Based
SDRAM
32K bytes
Flash ROM
512K bytes
EEPROM
256 bytes
Watchdog Timer
1.0 sec H/W
LED
PWR: Power Input plugged and On (Green)
RDY: System startup ready (Red)
Network Interface
Ethernet
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connector
1* RJ-45, Auto MDI/MDI-X
Protection
Built-in 1.5 KV magnetic isolation protection
LED
Upper (LAN Activity): Orange On & Blinking
Lower(10M/100M): 10M (Green Off) /100M(Green ON)
Digital Input
Input Channels
14 channels
Input Type
source type
Input Mode
D/I or event counting with input frequency of 100 Hz max
DC Input
30V max
Threshold Voltage
4V
Responding Time to Host PC Request
<2ms
Isolation Voltage
2500Vrms
Digital Output
Output Channels
8 channels
Output Type
SSR output, sink type
Output Mode
Level or pulse output with programmable pulse width
Working Range
5-40VDC
Driving Capacity
250mA max
Responding Time to Host PC Request
<2ms
Output Initial State
Programmable
Isolation Voltage
2500Vrms
Feature
Network Protocols
IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server
Configuration
Windows Utility, SNMP, Web, DHCP Client, BootP for firmware update
Flexible peer-to-peer IO
one-to-one, one-to-many, many-to-one, and many-to-many communication
Windows Utility
Block I/O Utility
OPC Server Utility
OPC Server for Modbus/TCP
SNMP
MIB-II: System, SNMP Trap and Private MIB
SNMP Trap Server
Up to 4 SNMP Trap Server
Logic Condition&Go Rules
Conditions of the DI/Counter values, Actions include DO/Pulse, Counter Reset and Trap
Logic Rules Remote mirror mode
Single host to host, Condition of DI and Action of DO
Power Requirements
System Power
external unregulated +24V (18-32V) 
Power Consumption
Max. 1.92W
Mechanical
Dimensions
120 (H) x 55 (W) x 75 (D) mm
Mounting
Din-Rail
Material
Aluminum
Environmental
Regulatory Approvals
CE, FCC Class A
Operating Temperature
-25 ~ 70°C
Operating Humidity
0 ~ 95% non-condensing
Storage Temperature
-40 ~ 80°C
Warranty
3 years
System
CPU
100MHZ, RISC-Based
SDRAM
32K bytes
Flash ROM
512K bytes
EEPROM
256 bytes
Watchdog Timer
1.0 sec H/W
LED
PWR: Power Input plugged and On (Green)
RDY: System startup ready (Red)
Network Interface
Ethernet
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connector
1* RJ-45, Auto MDI/MDI-X
Protection
Built-in 1.5 KV magnetic isolation protection
LED
Upper (LAN Activity): Orange On & Blinking
Lower(10M/100M): 10M (Green Off) /100M(Green ON)
Digital Input
Input Channels
14 channels
Input Type
source type
Input Mode
D/I or event counting with input frequency of 100 Hz max
DC Input
30V max
Threshold Voltage
4V
Responding Time to Host PC Request
<2ms
Isolation Voltage
2500Vrms
Digital Output
Output Channels
8 channels
Output Type
SSR output, sink type
Output Mode
Level or pulse output with programmable pulse width
Working Range
5-40VDC
Driving Capacity
250mA max
Responding Time to Host PC Request
<2ms
Output Initial State
Programmable
Isolation Voltage
2500Vrms
Feature
Network Protocols
IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server
Configuration
Windows Utility, SNMP, Web, DHCP Client, BootP for firmware update
Flexible peer-to-peer IO
one-to-one, one-to-many, many-to-one, and many-to-many communication
Windows Utility
Block I/O Utility
OPC Server Utility
OPC Server for Modbus/TCP
SNMP
MIB-II: System, SNMP Trap and Private MIB
SNMP Trap Server
Up to 4 SNMP Trap Server
Logic Condition&Go Rules
Conditions of the DI/Counter values, Actions include DO/Pulse, Counter Reset and Trap
Logic Rules Remote mirror mode
Single host to host, Condition of DI and Action of DO
Power Requirements
System Power
external unregulated +24V (18-32V) 
Power Consumption
Max. 1.92W
Mechanical
Dimensions
120 (H) x 55 (W) x 75 (D) mm
Mounting
Din-Rail
Material
Aluminum
Environmental
Regulatory Approvals
CE, FCC Class A
Operating Temperature
-25 ~ 70°C
Operating Humidity
0 ~ 95% non-condensing
Storage Temperature
-40 ~ 80°C
Warranty
3 years