Cerca
Filters
Close

JetCon-2302

Convertitore industriale da 2 porte Ethernet a 2 porte in fibra ottica multi-mode o single-mode
Caratteristiche
  • 2x Channels 10/100 TX to 2x 100 FX
  • 2x 10/100TX with 2 100FX Fast Ethernet Fiber Switch
  • Dual Forwarding modes- Switching and Pure converter
  • Supports Auto MDI/MDI-X, Auto Negotiation
  • Supports Multi-mode 2KM, Single-mode 30KM
  • 3.2Gbps Non-Blocking Switch Fabric
  • Fault Alert for port and power
  • Redundant 10~60V DC Power inputs, DC polarity protected
  • Supports AC 1.5KV Hi-Pot isolation protection
  • EN 50121-3-2 Railway EMC compliance (applying)
  • Operating temperature -25°~75°C
  • Operating temperature -40°~75°C
Produttore:: Korenix Technology
Technology
Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control and Back Pressure
Switch Technology
3.2 Gbps Store and Forwarding Technology
System forwarding performance
1.19 Mega packets per second, 64 bytes packet size. (Switch Mode)
14880 pps for 10Base-T
148810 pps for 100Base-TX/ FX
Mac address
1K MAC address entries with automatic learning and aging (Switch Mode only)
Packet Buffer
512Kbits shared memory
Forwarding Technology
Store & Forward
Operating Mode
Converter/ Switch mode selected by DIP switch
Switch Mode: data exchange on 4 ports (Channel A, B exchange)
Converter mode: data forwarding on independent channel (A, B)
Digital Output
Dry Relay Output with 1A @24V DC ability

Interface
Number of Ports
Ethernet copper port:
2 × 10/100TX ports with Auto MDI/MDI-X, Auto Negotiation, flow control and back-pressure enabled (Switch mode)
Fiber port:
2 × 100Mbps Fiber port, SC flow control and back-pressure disabled
JetCon 2302-m: Multi-mode (Channel A,B)
JetCon 2302-s: Single-mode (Channel A,B)
Cable
RJ-45 Connector:
10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable, 100 meters
100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable, 100 meters
Fast Ethernet Fiber Transceiver:
JetCon 2302-m: 2KM distance, 50~62.5/125um Multi-mode fiber cable.
JetCon 2302-s: 30KM distance,8~10/125um Single-mode fiber cable.
Diagnostic LEDs
System Power (Green on) : Power 1 , 2
Relay Alarm: Active (Red)
Op. Mode: Convert (Green on)
Fiber Ethernet Port(Channel A/B): Link/Activity (Green on/ Yellow Blinking) 
Ethernet Port: Link/Activity (Green on/Yellow Blinking)
Reset Button
For Operating mode change
DIP Switch 1~4: Port Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 5: Operating mode select, Converter mode (On)/ Switch mode (Off)
DIP Switch 6: Power Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 7: Not available
Power Connector
Removable Terminal Block
Digital Output
Removable Terminal Block

Power Requirements
Power Supply
DC 10~60V with polarity reverses correction.
Supports Positive/Negative power system
Power Consumption
6Watts / DC 24V

Mechanical
Installation
DIN Rail Installation
Casing
Ingress Protection code -30
Dimensions
99 (D) x55(W)x 120(H), unit:mm (without Din-rail kit)
Weight
0.49Kg w/o package

Environmental
Operating Temperature
-25~ 75°C (JetCon 2302-w:-40~ 75°C)
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 75°C
Operating Humidity
0% to 95% (Non-condensing)
Hi-Pot
AC 1.5KV on port to port and port to power

Regulatory Approvals
EMC
Compliant with EN 50121-3-2 EMC
EMI
CE/EN 61000-6-4, CISPR-16-1-2:2003,
CISPR-16-2-1:2003, CISPR-16-2-3:2006, CISPR-22:2005+A1 :2005(9.6), 
FCC part 15B Class A
EMS
CE/ EN 61000-6-2 :2005
IEC 61000-4-2 :2008, IEC 61000-4-3 :2006+A1 :2007,IEC
61000-4-4 :2004, IEC 61000-4-5 :2005, IEC 61000-4-6 :2008, 
IEC 61000-4-8 :1993+A1 :2000
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Free Fall
IEC 60068-2-32
Technology
Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control and Back Pressure
Switch Technology
3.2 Gbps Store and Forwarding Technology
System forwarding performance
1.19 Mega packets per second, 64 bytes packet size. (Switch Mode)
14880 pps for 10Base-T
148810 pps for 100Base-TX/ FX
Mac address
1K MAC address entries with automatic learning and aging (Switch Mode only)
Packet Buffer
512Kbits shared memory
Forwarding Technology
Store & Forward
Operating Mode
Converter/ Switch mode selected by DIP switch
Switch Mode: data exchange on 4 ports (Channel A, B exchange)
Converter mode: data forwarding on independent channel (A, B)
Digital Output
Dry Relay Output with 1A @24V DC ability

Interface
Number of Ports
Ethernet copper port:
2 × 10/100TX ports with Auto MDI/MDI-X, Auto Negotiation, flow control and back-pressure enabled (Switch mode)
Fiber port:
2 × 100Mbps Fiber port, SC flow control and back-pressure disabled
JetCon 2302-m: Multi-mode (Channel A,B)
JetCon 2302-s: Single-mode (Channel A,B)
Cable
RJ-45 Connector:
10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable, 100 meters
100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable, 100 meters
Fast Ethernet Fiber Transceiver:
JetCon 2302-m: 2KM distance, 50~62.5/125um Multi-mode fiber cable.
JetCon 2302-s: 30KM distance,8~10/125um Single-mode fiber cable.
Diagnostic LEDs
System Power (Green on) : Power 1 , 2
Relay Alarm: Active (Red)
Op. Mode: Convert (Green on)
Fiber Ethernet Port(Channel A/B): Link/Activity (Green on/ Yellow Blinking) 
Ethernet Port: Link/Activity (Green on/Yellow Blinking)
Reset Button
For Operating mode change
DIP Switch 1~4: Port Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 5: Operating mode select, Converter mode (On)/ Switch mode (Off)
DIP Switch 6: Power Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 7: Not available
Power Connector
Removable Terminal Block
Digital Output
Removable Terminal Block

Power Requirements
Power Supply
DC 10~60V with polarity reverses correction.
Supports Positive/Negative power system
Power Consumption
6Watts / DC 24V

Mechanical
Installation
DIN Rail Installation
Casing
Ingress Protection code -30
Dimensions
99 (D) x55(W)x 120(H), unit:mm (without Din-rail kit)
Weight
0.49Kg w/o package

Environmental
Operating Temperature
-25~ 75°C (JetCon 2302-w:-40~ 75°C)
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 75°C
Operating Humidity
0% to 95% (Non-condensing)
Hi-Pot
AC 1.5KV on port to port and port to power

Regulatory Approvals
EMC
Compliant with EN 50121-3-2 EMC
EMI
CE/EN 61000-6-4, CISPR-16-1-2:2003,
CISPR-16-2-1:2003, CISPR-16-2-3:2006, CISPR-22:2005+A1 :2005(9.6), 
FCC part 15B Class A
EMS
CE/ EN 61000-6-2 :2005
IEC 61000-4-2 :2008, IEC 61000-4-3 :2006+A1 :2007,IEC
61000-4-4 :2004, IEC 61000-4-5 :2005, IEC 61000-4-6 :2008, 
IEC 61000-4-8 :1993+A1 :2000
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Free Fall
IEC 60068-2-32